Magnetostatic properties of amorphous and nanostructured Fe73.5Si13.5B9Cu1Nb3 wires

被引:1
|
作者
Perov, N.
Dokukina, A.
Konstantinova, A.
Santos, J. D.
Sanchez, M. L.
Gorria, P.
Hernando, B.
机构
[1] Univ Oviedo, Dept Fis, E-33007 Oviedo, Spain
[2] Moscow MV Lomonosov State Univ, Fac Phys, Moscow 119992, Russia
关键词
amorphous metals; metallic glasses; alloys; magnetic properties;
D O I
10.1016/j.jnoncrysol.2006.12.090
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
We present the results of experimental investigations of magnetostatic properties of Fe-based amorphous wires with diameter about 100 mu m. The samples were annealed at different conditions. The as-quenched sample had a weak increase (about 5%) of the magnetization with magnetic field decrease - the negative differential magnetic permeability could be observed in its hysteresis loops. The coercive force was about 0.2 Oe. The conventional annealing decreased the value of the saturation field down to 5 Oe without change of the coercive force value. When the annealing was accompanied with torsion stress the coercive force became less than 50 mOe. After the current annealing any peculiarities disappeared in magnetization in a weak magnetic field. (c) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码:911 / 913
页数:3
相关论文
共 50 条
  • [31] Structure, Magnetic Properties, and Magnetoimpedance of the Fe73.5-xCrxSi13.5B9Nb3Cu1 (x=0 to 5) Alloys
    Volchkov, Stanislav O.
    Lukshina, Vera A.
    Zakharova, Anna A.
    Potapov, Alexander P.
    Volkova, Elena G.
    IEEE TRANSACTIONS ON MAGNETICS, 2014, 50 (11)
  • [32] Heat-treatment dependences of magnetostriction, magnetomechanical coupling and structure of Fe73.5Cu1Nb3Si13.5B9 alloy
    Kaczkowski, Z
    Vlasak, G
    Duhaj, P
    Ruuskanen, P
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 1998, 185 (01) : 112 - 114
  • [33] Optimization of Planar Flow Melt Spinning Process for Producing Thin, Wide, and Continuous Amorphous Ribbons of Fe73.5Si13.5B9Nb3Cu1 Alloys
    Raju, Meenuga Shanthi
    Babu, D. Arvindha
    Majumdar, Bhaskar
    Birru, Anil Kumar
    Raja, M. Manivel
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024,
  • [34] The change of domain structure of the amorphous microwire of Fe73.5Cu1Si13.5B9 composition under thermal treatment
    Aksenov, O. I.
    Abrosimova, G. E.
    Aronin, A. S.
    Orlova, N. N.
    Churyukanova, M. N.
    Zhukova, V. A.
    Zhukov, A. P.
    JOURNAL OF APPLIED PHYSICS, 2017, 122 (23)
  • [35] Nanocrystallization in FINEMET-Type Fe73.5Nb3Cu1Si13.5B9 and Fe72.5Nb1.5Mo2Cu1.1Si14.2B8.7 Thin Films
    Mikhalitsyna, Evgeniya A.
    Kataev, Vasiliy A.
    Larranaga, Aitor
    Lepalovskij, Vladimir N.
    Kurlyandskaya, Galina V.
    MATERIALS, 2020, 13 (02)
  • [36] Effect of structural transformations preceding crystallization on functional properties of Fe73.5Cu1Nb3Si15.5B7 amorphous alloy
    Maricic, Aleksa M.
    Minic, Dusan M.
    Blagojevic, Vladimir A.
    Kalezic-Glisovic, Aleksandra
    Minic, Dragica M.
    INTERMETALLICS, 2012, 21 (01) : 45 - 49
  • [37] Phase transformations and electrical and magnetic properties of Fe73.5Cu1Nb3Si15.5B7 amorphous alloy
    Minic, D. M.
    Maricic, A.
    JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS, 2010, 12 (02): : 233 - 238
  • [38] Correlation between microstructure and magnetic properties of amorphous and nanocrystalline Fe73.5Cu1Nb3Si16.5B6
    Kulik, T
    Vlasak, G
    Zuberek, R
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 226 : 701 - 705
  • [39] Structure and soft magnetic properties of FINEMET type alloys: Fe73.5Si13.5Nb3-xMoxB9Cu1 (x=1.5, 2)
    Silveyra, Josefina M.
    Moya, Javier A.
    Cremaschi, Victoria J.
    Janickovic, Dusan
    Svec, Peter
    HYPERFINE INTERACTIONS, 2010, 195 (1-3): : 173 - 177
  • [40] Phase transformations of Fe73.5Cu1Nb3Si15.5B7 amorphous alloy upon thermal treatment
    Gavrilovic, Aleksandra
    Minic, Dusan M.
    Rafailovic, Lidija D.
    Angerer, Paul
    Wosik, Jaroslaw
    Maricic, Aleksa
    Minic, Dragica M.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 504 (02) : 462 - 467