Surface relaxation during plasma chemical vapor deposition of diamond-like carbon films, investigated by in-situ ellipsometry

被引:2
|
作者
von Keudell, A [1 ]
Schwarz-Selinger, T [1 ]
Jacob, W [1 ]
机构
[1] EURATOM Assoc, Max Planck Inst Plasmaphys, D-85748 Garching, Germany
关键词
diamond like carbon; plasma film deposition; in-situ ellipsometry; ion-thin-film interaction;
D O I
10.1016/S0040-6090(97)00423-9
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The ion-thin-film interaction during plasma chemical vapor deposition of diamond like carbon (DLC) films from a methane electron cyclotron resonance (ECR) plasma was investigated by means of in-situ ellipsometry. The ion bombardment during growth leads to a disturbed surface layer, which becomes apparent in the in-situ ellipsometric results by optical constants, which are higher than those for the bulk material. The optical constants of the modified surface layer increase with ion energy during deposition, but decrease with the addition of hydrogen to the source gas. After switching off the plasma, the increased optical constants of the surface layer relax to their equilibrium state. The sources of this modified film surface and the mechanisms for its relaxation are discussed in this paper. (C) 1997 Elsevier Science S.A.
引用
收藏
页码:195 / 198
页数:4
相关论文
共 50 条
  • [41] Preparation of diamond-like carbon by PBII-enhanced microwave ECR chemical vapor deposition
    Ma, Guojia
    Zhang, Huafang
    Wu, Hongchen
    Peng, Liping
    Jiang, Yanli
    SURFACE & COATINGS TECHNOLOGY, 2007, 201 (15) : 6623 - 6626
  • [42] Deposition behavior and tribological properties of diamond-like carbon coatings on stainless steels via chemical vapor deposition
    Labani Mustafi
    M.M.Rahman
    Mohammad Nur E Alam Al Nasim
    Mohammad Asaduzzaman Chowdhury
    M.H.Monir
    InternationalJournalofMineralsMetallurgyandMaterials, 2018, 25 (11) : 1335 - 1343
  • [43] Deposition behavior and tribological properties of diamond-like carbon coatings on stainless steels via chemical vapor deposition
    Mustafi, Labani
    Rahman, M. M.
    Al Nasim, Mohammad Nur E. Alam
    Chowdhury, Mohammad Asaduzzaman
    Monir, M. H.
    INTERNATIONAL JOURNAL OF MINERALS METALLURGY AND MATERIALS, 2018, 25 (11) : 1335 - 1343
  • [44] Hybrid plasma system for diamond-like carbon film deposition
    Korzec, D
    Fedosenko, G
    Georg, A
    Engemann, J
    SURFACE & COATINGS TECHNOLOGY, 2000, 131 (1-3) : 20 - 25
  • [45] Effects of source gases on the properties of silicon/nitrogen-incorporated diamond-like carbon films prepared by plasma-enhanced chemical vapor deposition
    Nakazawa, Hideki
    Magara, Kohei
    Takami, Takahiro
    Ogasawara, Haruka
    Enta, Yoshiharu
    Suzuki, Yushi
    THIN SOLID FILMS, 2017, 636 : 177 - 182
  • [46] Optimization of radio frequency inductively coupled plasma enhanced chemical vapour deposition process of diamond-like carbon films
    Kijaszek, Wojciech
    Oleszkiewicz, Waldemar
    OPTICA APPLICATA, 2016, 46 (02) : 167 - 172
  • [47] RF PLASMA-ASSISTED DEPOSITION OF DIAMOND-LIKE CARBON-FILMS FROM METHANOL-WATER VAPOR MIXTURE
    KOMATH, M
    ZAMBARE, M
    GANGAL, SA
    KULKARNI, SK
    DIAMOND AND RELATED MATERIALS, 1994, 4 (01) : 15 - 19
  • [48] Microwave plasma chemical vapour deposition of diamond like carbon thin films
    Patil, DS
    Ramachandran, K
    Venkatramani, N
    Pandey, M
    Venkateswaran, S
    D'Cunha, R
    JOURNAL OF ALLOYS AND COMPOUNDS, 1998, 278 (1-2) : 130 - 134
  • [49] EFFECT OF TEMPERATURE ON SELF-ASSEMBLY OF DIAMOND-LIKE CARBON (DLC) GROWN BY PLASMA ENHANCED CHEMICAL VAPOR DEPOSITION (PECVD)
    Mahapatra, Ojas
    Maheswaran, R.
    Kumar, N. Satya Vijaya
    Ganesh, K. R.
    Gopalakrishnan, C.
    Thiruvadigal, D. John
    Raja, S. V. Kasmir
    SURFACE REVIEW AND LETTERS, 2009, 16 (03) : 337 - 341
  • [50] The effect of the substrate bias voltage and the deposition pressure on the properties of diamond-like carbon produced by inductively coupled plasma assisted chemical vapor deposition
    Kim, H
    Jung, DH
    Park, B
    Yoo, KC
    Lee, JJ
    Joo, JH
    SURFACE & COATINGS TECHNOLOGY, 2005, 193 (1-3) : 255 - 258