Kirkendall Effect in Twin-Roll Cast AA 3003 Aluminum Alloy

被引:4
作者
Bajer, Jan [1 ]
Zaunschirm, Stefan [2 ]
Plank, Bernhard [2 ]
Slapakova, Michaela [1 ]
Bajtosova, Lucia [1 ]
Cieslar, Miroslav [1 ]
Kastner, Johann [2 ]
机构
[1] Charles Univ Prague, Fac Math & Phys, Ke Karlovu 5, Prague 12116, Czech Republic
[2] Univ Appl Sci Upper Austria, Res Grp Computed Tomog, Stelzhamerstr 23, A-4600 Wels, Austria
关键词
twin-roll casting; aluminum alloy; Kirkendall effect; X-ray computer tomography; MECHANICAL-PROPERTIES; AL-SI; DIFFUSION; SOLIDIFICATION; EVOLUTION; POROSITY; RECRYSTALLIZATION; HOMOGENIZATION; SEGREGATION; NUCLEATION;
D O I
10.3390/cryst12050607
中图分类号
O7 [晶体学];
学科分类号
0702 ; 070205 ; 0703 ; 080501 ;
摘要
The formation of an inhomogeneous structure with central segregation occurs in commercial twin-roll cast AA 3003 aluminum alloy. The segregations form as manganese, iron, and silicon-rich channels spread in the rolling direction. Diffusion of silicon occurs during annealing at 450 degrees C, and the formation and growth of voids due to the Kirkendall effect occur. The evolution of pores studied by scanning electron microscopy and X-ray computed tomography shows that pores are formed near original pure silicon clusters. Their coalescence and the formation of large voids in the central zone of the strip occur at longer annealing times.
引用
收藏
页数:9
相关论文
共 39 条
  • [1] CONTROLLED POROSITY BY AN EXTREME KIRKENDALL EFFECT
    ALDINGER, F
    [J]. ACTA METALLURGICA, 1974, 22 (07): : 923 - 928
  • [2] [Anonymous], 2008, PAMM, DOI DOI 10.1002/PAMM.200700867
  • [3] Effects of cluster characteristics on two-step aging behavior in Al-Mg-Si alloys with different Mg/Si ratios and natural aging periods
    Aruga, Yasuhiro
    Kim, SeongNyeong
    Kozuka, Masaya
    Kobayashi, Equo
    Sato, Tatsuo
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 718 : 371 - 376
  • [4] Formulation of initial artificial age-hardening response in an Al-Mg-Si alloy based on the cluster classification using a high-detection-efficiency atom probe
    Aruga, Yasuhiro
    Kozuka, Masaya
    Sato, Tatsuo
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 739 : 1115 - 1123
  • [5] Analysis of macro segregation in twin-roll cast aluminium strips via solidification curves
    Birol, Yucel
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 486 (1-2) : 168 - 172
  • [6] Homogenization of a twin-roll cast thin Al-Mn strip
    Birol, Yucel
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 471 (1-2) : 122 - 127
  • [7] Diffusion mobilities in the fcc_A1 Cu-Si, Al-Si and Al-Cu-Si alloys
    Cao, Dachun
    Liu, Ya
    Su, Xuping
    Wang, Jianhua
    Tu, Hao
    Huang, Jianfeng
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 551 : 155 - 163
  • [8] Pore evolution regulation in synthesis of open pore structured Ti-Al intermetallic compounds by solid diffusion
    Chen, M. R.
    Jiang, Y.
    He, Y. H.
    Lin, L. W.
    Huang, B. Y.
    Liu, C. T.
    [J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2012, 521 : 12 - 15
  • [9] Effect of thermomechical pretreatment on mechanical properties of modified Al-Mn-Fe-Si based alloys
    Cieslar, Miroslav
    Slamova, Margarita
    Hajek, Michal
    Vesely, Jozef
    [J]. MATERIALS STRUCTURE & MICROMECHANICS OF FRACTURE V, 2008, 567-568 : 325 - +
  • [10] Identification of intermetallic precipitates formed during re-solidification of brazed aluminium alloys
    Dehmas, M
    Valdés, R
    Lafont, MC
    Lacaze, J
    Viguier, B
    [J]. SCRIPTA MATERIALIA, 2006, 55 (02) : 191 - 194