Construction of the Facility for Aluminium Alloys Electromagnetic Stirring During Casting

被引：3
作者：
Mikolajczak, Piotr [1 ]
Janiszewski, Jerzy [2 ]
Jackowski, Jacek [1 ]
机构：
[1] Politechn Poznanska, Inst Mat Technol, Poznan, Poland
[2] Politechn Poznanska, Inst Elect Power Engn, Poznan, Poland
来源：
ADVANCES IN MANUFACTURING II, VOL 4 - MECHANICAL ENGINEERING | 2019年
基金：
欧盟第七框架计划;
关键词：
Casting; Electromagnetic stirring; Aluminium alloys; Intermetallic phases; beta-Al5FeSi precipitate; HEAT-TREATED; 356-ALUMINUM-ALLOY; INTERMETALLIC PHASES; DIRECTIONAL SOLIDIFICATION; METALLURGICAL PARAMETERS; MECHANICAL-PROPERTIES; IRON-INTERMETALLICS; TENSILE PROPERTIES; FLUID-FLOW; AS-CAST; FE;
D O I：
10.1007/978-3-030-16943-5_15
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The reuse of aluminium, recycling, leads to an increase in the content of alloying elements, including iron. The Fe-rich intermetallic phases called platelets or needles beta-Al5FeSi are hard, brittle and have a highly detrimental effect on the properties of alloys and castings. The construction of facility was proposed, built and its parameters were described. The facility construction allows the castings to be solidified in moulds with a diameter up to 70 mm under intensive stirring in sample castings to decrease negative effect of Fe-rich phases. Facility included the set of coils for rotating magnetic field generation, autotransformers, thermal conditions control unit, thermal insulations, cooler for coils protection, teslameter and brass water-cooled chiller. The construction allowed for bulk solidification with equiaxed dendritic structure in the whole sample. The subject of the presence of forced convection to improve casting properties in the bulk solidification and in the directional solidification was discussed.
引用
收藏
页码：164 / 175
页数：12
相关论文
共 31 条
  • [1] The effect of squeeze casting pressure and iron content on the impact energy of Al-7Si-0.7Mg alloy
    Chen, ZW
    Thorpe, WR
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1996, 221 (1-2): : 143 - 153
  • [2] Iron-related porosity in Al-Si-(Cu) foundry alloys
    Dinnis, Cameron M.
    Taylor, John A.
    Dahle, Arne K.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 425 (1-2): : 286 - 296
  • [3] As-cast morphology of iron-intermetallics in Al-Si foundry alloys
    Dinnis, CM
    Taylor, JA
    Dahle, AK
    [J]. SCRIPTA MATERIALIA, 2005, 53 (08) : 955 - 958
  • [4] Effects of intensive forced melt convection on the mechanical properties of Fe containing Al-Si based alloys
    Fang, X.
    Shao, G.
    Liu, Y. Q.
    Fan, Z.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 445 : 65 - 72
  • [5] Microstructure and mechanical properties of spray deposited hypoeutectic Al-Si alloy
    Ferrarini, CE
    Bolfarini, C
    Kiminami, CS
    Botta, WJ
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 : 577 - 580
  • [6] Effect of microstructural constituents on the thermal fatigue life of A319 aluminum alloy
    Firouzdor, V.
    Rajabi, M.
    Nejati, E.
    Khomamizadeh, F.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 454 : 528 - 535
  • [7] Iron intermetallic phases in the Al corner of the Al-Si-Fe system
    Khalifa, W
    Samuel, FH
    Gruzleski, JE
    [J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2003, 34A (03): : 807 - 825
  • [8] The influence of Mn and Cr on the tensile properties of A356-0.2OFe alloy
    Kim, HY
    Han, SW
    Lee, HM
    [J]. MATERIALS LETTERS, 2006, 60 (15) : 1880 - 1883
  • [9] Micromechanics of room and high temperature fracture in 6xxx Al alloys
    Lassance, D.
    Fabregue, D.
    Delannay, F.
    Pardoen, T.
    [J]. PROGRESS IN MATERIALS SCIENCE, 2007, 52 (01) : 62 - 129
  • [10] A study of tensile properties in Al-Si-Cu and Al-Si-Mg alloys:: Effect of β-iron intermetallics and porosity
    Ma, Z.
    Samuel, A. M.
    Samuel, F. H.
    Doty, H. W.
    Valtierra, S.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 490 (1-2): : 36 - 51
1234