Modelling of flow behaviour in continuous casting tundish

被引：34

作者：

Singh, RK ^{[1
]}

Paul, A ^{[1
]}

Ray, AK ^{[1
]}

机构：

[1] Steel Author India Ltd, Res & Dev Ctr Iron & Steel, Ranchi 834002, Bihar, India

来源：

SCANDINAVIAN JOURNAL OF METALLURGY | 2003年 / 32卷 / 03期

关键词：

computational fluid dynamics; continuous casting; tundish; mathematical modelling;

D O I：

10.1034/j.1600-0692.2003.00635.x

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

One of the steel plants of Steel Authority of India Ltd (SAIL) is considering a proposal to increase the capacity of tundish from the present level of 17 tonne to a targeted level of 25 tonne. As a step towards designing a larger tundish, the flow profile of steel in various alternate tundish configurations considered have been characterized using a 3-D steady-state mathematical simulation under assumption of both isothermal and non-isothermal conditions. Apart from generation of flow profiles of steel inside the tundish, the Residence Time Distribution curves have been predicted for analysis of flow behaviour inside the tundish. Based on the above analysis, the optimum tundish configuration was chosen for further development.

引用

页码：137 / 146

页数：10

共 13 条

[1]

CHAKRABORTY S, 1992, IRONMAK STEELMAK, V19, P479

[2]

CHANDRASHEKHAR D, 1995, ISIJ INT, V35, P163

[3]

*FLUENT INC, 1998, FLUENT US GUID, V3, P7

[4]

*FLUENT INC, 1998, FLUENT 5 US GUID, V2, P9

[5]

KNOEPKE J, 1986, STEELMAKING C P, V69, P777

[6]

Launder B. E., 1974, Computer Methods in Applied Mechanics and Engineering, V3, P269, DOI 10.1016/0045-7825(74)90029-2

[7]

LEVENSPIEL O, 1972, CHEM REACTION ENG, P242

[8] Physical and mathematical modelling of tundish flows using digital particle image velocimetry and CFD-methods [J].

Odenthal, HJ ;

Pfeifer, H ;

Klaas, M .

STEEL RESEARCH, 2000, 71 (6-7) :210-219

[9]

Patharikar S., 1980, NUMERICAL HEAT TRANS

[10] Physical and mathematical modelling of flow and residence time distributions in different tundish designs [J].

Robert, A ;

Mazumdar, D .

STEEL RESEARCH, 2001, 72 (03) :97-105

← 1 2 →