Mechanical properties of carbon/carbon composites with the fibre/matrix interface modified by carbon nanofibers

被引：24

作者：

Jie, Chen ^{[1
]}

Long, Huang ^{[1
]}

Peng, Xiao ^{[1
]}

Xiang, Xiong ^{[1
]}

机构：

[1] Cent S Univ, State Key Lab Powder Met, Changsha 410083, Hunan, Peoples R China

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2016年 / 656卷

基金：

中国国家自然科学基金;

关键词：

Mechanical characterization; Microanalysis; Composites; Bonding; Interfaces; CONDUCTIVITY; C/C;

D O I：

10.1016/j.msea.2016.01.013

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In order to modification, carbon nanofibers (CNFs) are uniformly dispersed on the fiber surface of the unidirectional carbon preform. The modified unidirectional carbon preform was then densified to obtain CNF-C/C composite by chemical vapor deposition (CVD). The microstructure and mechanical properties of the CNF-C/C composite were investigated. Results show that CNFs on carbon fibers become the active points and induce the ordered deposition of PyC during CVD. In the CNF-C/C composite, there is an interface layer composed of CNFs and high texture PyC around them between the fibers and matrix. After the modification of fiber/matrix interface by CNFs, the mechanical properties of C/C composite are adjusted. After modification, the fracture mode is changed and the flexural strength is enhanced in both vertical and parallel direction. (C) 2016 Elsevier B.V. All rights reserved.

引用

页码：21 / 26

页数：6

共 17 条

[1] Review of the mechanical properties of carbon nanofiber/polymer composites [J].

Al-Saleh, Mohammed H. ;

Sundararaj, Uttandaraman .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2011, 42 (12) :2126-2142

[2]

Buckley J.D., 1993, CARBON-CARBON MATERIALS AND COMPOSITES, P1

[3] The catalytic effect of boric acid on polyacrylonitrile-based carbon fibers and the thermal conductivity of carbon/carbon composites produced from them [J].

Chen Jie ;

Xiong Xiang ;

Xiao Peng ;

Zhang Hong-Bo .

CARBON, 2010, 48 (08) :2341-2346

[4] The experimental exploration of carbon nanofiber and carbon nanotube additives on thermal behavior of phase change materials [J].

Cui, Yanbin ;

Liu, Caihong ;

Hu, Shan ;

Yu, Xun .

SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2011, 95 (04) :1208-1212

[5] The effect of processing on the structure and properties of carbon fibers [J].

Edie, DD .

CARBON, 1998, 36 (04) :345-362

[6] Study of the mechanical properties of carbon nanofiber reinforced carbon/carbon composites [J].

Li, Jinsong ;

Luo, Ruiying .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2008, 39 (11) :1700-1704

[7]

Luo Ruiying, 2001, CARBON TECHNIQUES, V4, P27

[8]

Maruyama B, 2002, SAMPE J, V38, P59

[9] The efficiency and mechanism of densification of 2-D C/C composites by coal-tar pitch impregnation [J].

Matzinos, PD ;

Patrick, JW ;

Walker, A .

CARBON, 2000, 38 (08) :1123-1128

[10] Mechanical properties and electrical conductivity of carbon-nanotube filled polyamide-6 and its blends with acrylonitrile/butadiene/styrene [J].

Meincke, O ;

Kaempfer, D ;

Weickmann, H ;

Friedrich, C ;

Vathauer, M ;

Warth, H .

POLYMER, 2004, 45 (03) :739-748

← 1 2 →