Application of full order sliding mode control based on different areas power system with load frequency control

In the traditional sliding mode control method, there always exist the singularity due to the reduced order of the control method. In order to eliminate the singularity, I propose a new full order sliding mode control method in this article, which has been firstly applied to load frequency control. The full order sliding mode control method includes the terminal sliding mode control (TSM) and the linear sliding mode control (LSM). TSM has the good characteristic of eliminating the singularity due to the avoidance of derivative of terms with fractional power factors. While the LSM is easy to design and has fast time convergence comparing to TSM. The model is based on the system with different kinds of turbine or the same kind of turbine, which contains the nonlinearities. The control purpose is to adjust the frequency deviation to zero. Through the simulation results, it is shown that the frequency deviation can be kept to zero in the condition of different load disturbances by the two approaches, which approves the robustness of the proposed methods. In addition, we compare the two methods with the traditional sliding mode control (SMC), which proves the superiority of the two methods in terms of chattering and response time. (C) 2019 ISA. Published by Elsevier Ltd. All rights reserved.