Heat transfer and thermal storage behaviour of gypsum boards incorporating micro-encapsulated PCM

被引:77
|
作者
Lai, Chi-ming [1 ]
Chen, R. H. [1 ]
Lin, Ching-Yao [1 ]
机构
[1] Natl Cheng Kung Univ, Dept Civil Engn, Tainan 701, Taiwan
关键词
Phase change material; Energy; Solar heat gain;
D O I
10.1016/j.enbuild.2010.02.018
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
In the application of energy storage and thermal environmental control, PCM (Phase Change Material) is a very promising material choice. This study incorporated mPCM (micro-encapsulated PCM) into gypsum to make mPCM gypsum board and then investigated the physical properties, heat transfer and thermal storage behaviour. The major control parameters are wall temperatures and the weight percentages of mPCM added to the gypsum boards. A melting fraction correlation, reduced from our test data and based on Stefan number (Ste), subcooling (Sb) and Fourier number, is proposed. It shows that case with a higher Ste or Sb can have a higher heat transfer through the hot wall. Thermal storage behaviour of mPCM gypsum boards is then analyzed. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码:1259 / 1266
页数:8
相关论文
共 50 条
  • [1] Heat transfer performance of graphene nano-platelets laden micro-encapsulated PCM with polymer shell for thermal energy storage based heat sink
    Praveen, B.
    Suresh, S.
    Pethurajan, Vignesh
    APPLIED THERMAL ENGINEERING, 2019, 156 : 237 - 249
  • [2] Thermal performance of micro-encapsulated PCM with LMA thermal percolation in TES based heat sink application
    Praveen, B.
    Suresh, S.
    ENERGY CONVERSION AND MANAGEMENT, 2019, 185 : 75 - 86
  • [3] Gypsum based composite materials with micro-encapsulated PCM: Experimental correlations for thermal properties estimation on the basis of the composition
    Toppi, Tommaso
    Mazzarella, Livio
    ENERGY AND BUILDINGS, 2013, 57 : 227 - 236
  • [4] Numerical study on convective heat transfer of nanofluid in a minichannel heat sink with micro-encapsulated PCM-cooled ceiling
    Yan, Wei-Mon
    Ho, C. J.
    Tseng, Yu-Ting
    Qin, Caiyan
    Rashidi, Saman
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2020, 153 (153)
  • [5] Experimental analysis on thermal energy storage performance of micro-encapsulated stearic acid and stearyl alcohol PCM slurries; A comparative study
    Boldoo, Tsogtbilegt
    Chinnasamy, Veerakumar
    You, Nayoung
    Cho, Honghyun
    JOURNAL OF ENERGY STORAGE, 2023, 73
  • [6] Study on the Behaviour of Thermal Stratification in Encapsulated PCM-based Storage System
    Majumdar, Rudrodip
    Saha, Sandip K.
    PROCEEDINGS OF THE 25TH NATIONAL AND 3RD INTERNATIONAL ISHMT-ASTFE HEAT AND MASS TRANSFER CONFERENCE, IHMTC 2019, 2019,
  • [7] Heat Transfer Modeling of PCM Thermal Storage at Cryogenic Temperatures
    Davidesko, Avshalom
    Chhetri, Avichial
    Tzabar, Nir
    14TH IIR CONFERENCE ON PHASE CHANGE MATERIALS AND SLURRIES FOR REFRIGERATION AND AIR CONDITIONING, 2024, : 246 - 253
  • [8] Synthesis and Thermal Properties of Magnesium Sulfate Heptahydrate/Urea Resin as Thermal Energy Storage Micro-Encapsulated Phase Change Material
    Liu, Chenzhen
    Ma, Ling
    Rao, Zhonghao
    Li, Yimin
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2018, 140 (01):
  • [9] Composite of wood-plastic and micro-encapsulated phase change material (MEPCM) used for thermal energy storage
    Jamekhorshid, A.
    Sadrameli, S. M.
    Barzin, R.
    Farid, M. M.
    APPLIED THERMAL ENGINEERING, 2017, 112 : 82 - 88
  • [10] A novel photovoltaic/thermal (PVT) system using nano-enhanced micro-encapsulated PCM slurry for steam production: A numerical study
    Azmeer, Ahmed
    Sheikh, Yahya
    Kanjo, Hasan A.
    Sabouni, Hamzeh
    International Journal of Thermofluids, 2025, 27