Prediction of creep life of X10CrMoVNbN-91 (P-91) steel through short term stress relaxation test methodology

被引:23
作者
Bose, SC [1 ]
Singh, K
Swaminathan, J
Sarma, DS
机构
[1] BHEL Corp, Corp R&D, Dept Met, Hyderabad 500093, Andhra Pradesh, India
[2] Natl Met Lab, MST Div, Jamshedpur 831007, Bihar, India
[3] Banaras Hindu Univ, Dept Met, Varanasi 221005, Uttar Pradesh, India
关键词
P-91; steel; ferritic-martensitic steel; stress relaxation; creep; microstructure;
D O I
10.1179/026708304225022304
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The methodology proposed here adopts short-term stress relaxation testing (SRT) to predict creep strength/life of X10CrMoVNbN 91 (P-91) steel. SRT has been performed at three temperatures (853, 873, 898 K), and at each temperature two prestrains (0(.)7 and 1(.)2%) were applied with a hold time of 7 h. The initial data, stress versus time, were converted to stress versus inelastic strain rate by computation and compared with conventional steady state creep rate. Creep life was predicted from the SRT results using the Monkman-Grant relationship, and compared with creep data. The comparison showed the predicted life to agree extremely well with the creep-rupture life (approximate to30 000 h). The calculated activation energy for SRT (719 kJ mol(-1)) was found to be higher than the creep (415 kJ mol(-1)). Detailed SEM and TEM studies revealed that the degradation of microstructure in terms of coarsening Of M23C6, and martensitic lath grains, had taken place and was commensurable to long term creep exposure.
引用
收藏
页码:1290 / 1296
页数:7
相关论文
共 27 条
[1]   STRESS-RELAXATION IN SINGLE-CRYSTALS OF COPPER AND ALUMINUM [J].
ALY, AA ;
ABDELMALIK, TG ;
ABDEEN, AM ;
ELLABANY, HM .
MATERIALS SCIENCE AND ENGINEERING, 1984, 62 (02) :181-185
[2]   Creep deformation in a modified 9Cr-1Mo steel [J].
Anderson, P ;
Bellgardt, T ;
Jones, FL .
MATERIALS SCIENCE AND TECHNOLOGY, 2003, 19 (02) :207-213
[3]   BOUNDARY DEFECTS, AND ATOMISTIC ASPECTS OF BOUNDARY SLIDING AND DIFFUSIONAL CREEP [J].
ASHBY, MF .
SURFACE SCIENCE, 1972, 31 (01) :498-&
[4]  
*ASM INT, 2000, ASM MET HDB, V8, P364
[5]  
Bose SC, 2003, J TEST EVAL, V31, P183
[6]  
CANINICO DA, 1982, THICK WALLED PRESSUR
[7]   Application of stress relaxation testing in metallurgical life assessment evaluations of GTD111 alloy turbine buckets [J].
Daleo, JA ;
Ellison, KA ;
Woodford, DA .
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 1999, 121 (01) :129-137
[8]  
EVANS RW, 1985, CREEP METAL ALLOYS
[9]   A PHYSICALLY-BASED CONSTITUTIVE MODEL FOR METAL DEFORMATION [J].
GHOSH, AK .
ACTA METALLURGICA, 1980, 28 (11) :1443-1465
[10]  
GOLDHOFF RM, 1971, T ASME, P1