High Temperature Stability of Bulk Ti3AlC2 Materials in Air

被引：0
|
作者：
Lee, D. H. [1 ]
Lee, D. B. [1 ]
机构：
[1] Sungkyunkwan Univ, Ctr Adv Plasma Surface Technol, Suwon 440746, South Korea
来源：
THERMEC 2006 SUPPLEMENT: 5TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS | 2007年 / 15-17卷
关键词：
Titanium aluminum carbide; sintering; chemical stability; oxidation;
D O I：
10.4028/www.scientific.net/AMR.15-17.410
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The high-temperature stability of Ti3AlC2 was investigated by subjecting Ti3AlC2 to cyclic oxidation conditions in air. Cyclic oxidation between 900 1200 degrees C for up to 100 hr resulted in the growth of matrix grains and the formation of the oxide layer that consisted of TiO2 and Al2O3. When the cyclic oxidation resistance was good, the oxide layer was thin and Al2O3-rich. When the cyclic oxidation resistance was bad, the oxide layer was thick and TiO2-rich. The oxidation rate Ti3AlC2 was not a direct function of oxidation temperature and grain size of the matrix.
引用
收藏
页码：410 / 415
页数：6
相关论文
共 50 条
  • [21] Oxidation Resistance of Materials Based on Ti3AlC2 Nanolaminate at 600 °C in Air
    Ivasyshyn, Andrij
    Ostash, Orest
    Prikhna, Tatiana
    Podhurska, Viktoriya
    Basyuk, Tatiana
    NANOSCALE RESEARCH LETTERS, 2016, 11
  • [22] Oxidation Resistance of Materials Based on Ti3AlC2 Nanolaminate at 600 °C in Air
    Andrij Ivasyshyn
    Orest Ostash
    Tatiana Prikhna
    Viktoriya Podhurska
    Tatiana Basyuk
    Nanoscale Research Letters, 2016, 11
  • [23] Synthesis of high purity Ti3AlC2 bulk material by hot-pressing
    Peng, CQ
    Wang, CA
    Huang, Y
    HIGH-PERFORMANCE CERAMICS III, PTS 1 AND 2, 2005, 280-283 : 1369 - 1372
  • [24] Effects of TiC and Ti3AlC2 addition on combustion synthesis of Ti3AlC2 powders
    Guo, JM
    Chen, KX
    Ge, ZB
    Zhou, HP
    Ning, XS
    JOURNAL OF INORGANIC MATERIALS, 2003, 18 (01) : 251 - 256
  • [25] Oxidation behavior of Ti3AlC2 powders in flowing air
    Wang, XH
    Zhou, YC
    JOURNAL OF MATERIALS CHEMISTRY, 2002, 12 (09) : 2781 - 2785
  • [26] Preparation and characteristics of Ti3AlC2 -Al3Ti/Al composite materials synthesized from pure Al and Ti3AlC2 powders
    Wang, Yuanbo
    Huang, Zhenying
    Hu, Wenqiang
    Cai, Leping
    Lei, Cong
    Yu, Qun
    Jiao, Yidan
    MATERIALS CHARACTERIZATION, 2021, 178
  • [27] Molten salt synthesis and formation mechanism of Ti3AlC2: A new path from Ti2AlC to Ti3AlC2
    Zhong, Yi
    Liu, Ying
    Jin, Na
    Lin, Zifeng
    Ye, Jinwen
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2023, 106 (09) : 5567 - 5579
  • [28] Effects of Ti3AlC2 Content on Cu/Ti3AlC2 Composites by Hot Pressing Method
    Huang Zhenying
    Zhai Hongxiang
    Li Mengqi
    Liu Xiu
    RARE METAL MATERIALS AND ENGINEERING, 2011, 40 : 529 - 532
  • [29] Structure stability of Ti3AlC2 in Cu and microstructure evolution of Cu-Ti3AlC2 composites
    Zhang, J.
    Wang, J. Y.
    Zhou, Y. C.
    ACTA MATERIALIA, 2007, 55 (13) : 4381 - 4390
  • [30] The reaction between Ti3AlC2 and Cu in the synthesis process of Cu/Ti3AlC2 composites
    Peng, Chunqing
    Wang, Chang-An
    Song, Yang
    Huang, Yong
    HIGH-PERFORMANCE CERAMICS IV, PTS 1-3, 2007, 336-338 : 1374 - 1376
12345