An integrated radial heat sink with thermosyphon for high-power LEDs applications

被引：9
|
作者：
Xiang, Jianhua [1 ]
Zhang, Chunliang [1 ]
Zhou, Chao [1 ]
Huang, Jiale [2 ]
Liu, Guiyun [1 ]
Zhao, Hongliang [1 ]
机构：
[1] Guangzhou Univ, Sch Mech & Elect Engn, Guangzhou 510006, Guangdong, Peoples R China
[2] South China Univ Technol, Sch Mech & Automot Engn, Guangzhou 510640, Guangdong, Peoples R China
来源：
HEAT AND MASS TRANSFER | 2019年 / 55卷 / 09期
基金：
中国国家自然科学基金;
关键词：
CONCENTRIC RING SUBJECT; THERMAL PERFORMANCE; CYLINDER; FINS;
D O I：
10.1007/s00231-019-02597-y
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The objective of this paper is to design and fabricate an integrated radial heat sink with thermosyphon for high-power LEDs applications. Effects of different structural parameters on the thermal resistance of the radial heat sink were firstly analyzed in terms of the theory of thermal resistance network. Subsequently, numerical simulation was applied to analyze thermal properties of the fin upon which the optimized structural parameters were obtained with the assistance of orthogonal test. Finally, the integrated radial heat sink with the optimized structural parameters was fabricated and then tested. Numerical and experimental results agree with each other showing that the maximum temperature, temperature uniformity and the thermal resistance of the heat sink are satisfied for high-power LEDs applications.
引用
收藏
页码：2455 / 2467
页数：13
相关论文
共 50 条
  • [31] Thermal Analysis and Comparison of Heat Dissipation Methods on High-Power LEDs
    Liu, Lei
    Zhang, G. Q.
    Yang, Daoguo
    Pan, Kailin
    Zhong, Hong
    Hou, Fengze
    2010 11TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY & HIGH DENSITY PACKAGING (ICEPT-HDP), 2010, : 1366 - 1370
  • [32] METAL FOIL RF MICRO-RELAY WITH INTEGRATED HEAT SINK FOR HIGH POWER APPLICATIONS
    Ozkeskin, F. M.
    Choi, S.
    Sarabandi, K.
    Gianchandani, Y. B.
    2011 IEEE 24TH INTERNATIONAL CONFERENCE ON MICRO ELECTRO MECHANICAL SYSTEMS (MEMS), 2011, : 776 - 779
  • [33] Optimizing and Analysis for the Microchannel Heat Sink of High-power LED Array
    Li, Ru-chun
    Zhang, Xin
    Zheng, Qi
    ADVANCES IN APPLIED MATERIALS AND ELECTRONICS ENGINEERING II, 2013, 684 : 261 - 264
  • [34] Testing of an Active Heat Sink for Advanced High-Power Laser Diodes
    Vetrovecb, John
    Copeland, Drew A.
    Feeler, Ryan
    Junghans, Jeremy
    HIGH-POWER DIODE LASER TECHNOLOGY AND APPLICATIONS IX, 2011, 7918
  • [35] Quasi-Passive Heat Sink for High-Power Laser Diodes
    Vetrovec, John
    HIGH-POWER DIODE LASER TECHNOLOGY AND APPLICATIONS VII, 2009, 7198
  • [36] Simulation analysis the effect of heat sink fins on the high-power LED
    Peng, D. S.
    Liu, K. L.
    Zhang, M. X.
    Tan, C. C.
    7TH GLOBAL CONFERENCE ON MATERIALS SCIENCE AND ENGINEERING (CMSE2018), 2019, 474
  • [37] Analysis and simulation of high-power LED array with microchannel heat sink
    Xin Zhang
    Ru-Chun Li
    Qi Zheng
    AdvancesinManufacturing, 2013, 1 (02) : 184 - 188
  • [38] Analysis and simulation of high-power LED array with microchannel heat sink
    Xin Zhang
    Ru-Chun Li
    Qi Zheng
    Advances in Manufacturing, 2013, 1 : 191 - 195
  • [39] Analysis and simulation of high-power LED array with microchannel heat sink
    Zhang, Xin
    Li, Ru-Chun
    Zheng, Qi
    ADVANCES IN MANUFACTURING, 2013, 1 (02) : 191 - 195
  • [40] Progress in the Development of Active Heat Sink for High-Power Laser Diodes
    Vetrovec, John
    Feeler, Ryan
    Bonham, Steve
    HIGH-POWER DIODE LASER TECHNOLOGY AND APPLICATIONS VIII, 2010, 7583
12345