Applications of zeolite-zirconia-copper nanocomposites as a new asphaltene inhibitor for improving permeability reduction during CO2 flooding

Using nanoparticles for adsorbing asphaltene was known as an efficient method among researchers for crude oil upgrading. In this study, zeolite-zirconia-copper nanocomposites (NCs) have been synthesized and characterized with Scanning electron microscopy (SEM), X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), and energy-dispersive X-ray (EDX). Then, CO2-oil interfacial tension (IFT) tests, Ultraviolet-visible spectroscopy (UV-Vis) Langmuir and Freundlich isotherm models, asphaltene precipitation tests at static phase, and dynamic CO2 flooding tests were performed in the presence of NCs and the results were compared with zeolite nanoparticles. Based on the characterization results, zirconia-copper particles were distributed at the surface of zeolite with total dimensions less than 30 nm, and the specific surface areas of the NCs (327.82 m(2)/g) was less than the pure zeolite (369.48 m(2)/g). It was seen that NCs had a greater asphaltene adsorption capacity and the application of decreasing asphaltene precipitation was higher in comparison to the zeolite nanoparticles. Accordingly, NCs were selected for performing dynamic CO2 tests and investigation of the permeability and porosity reduction parameters at obtained static condition. After adding NCs at the dynamic phase, asphaltene depositions that occured after CO2 injection was decreased and permeability/porosity reduction parameters were improved.