Comparison of workability and mechanical properties of self-compacting lightweight concrete and normal self-compacting concrete

被引:39
作者
Lo, T. Y. [1 ]
Tang, P. W. C. [1 ]
Cui, H. Z. [1 ]
Nadeem, A. [1 ]
机构
[1] City Univ Hong Kong, Dept Bldg & Construct, Hong Kong, Hong Kong, Peoples R China
关键词
self-compacting lightweight concrete; self-compacting concrete; mechanical properties; workability;
D O I
10.1179/143307507X196239
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The workability and mechanical properties of self-compacting lightweight concrete and normal self-compacting concrete have been studied. Self-compacting lightweight concrete with a binder content of 500-650 kg m(-3) and a density of 1650 kg m(-3) was made using less superplasticizer and viscosity modifying agent and a lower water/binder ratio than normal self-compacting concrete. The bulk density was only 75% of normal self-compacting concrete but with a similar compressive strength. The elastic modulus was about 80% of that of normal self-compacting concrete. These results indicate that self-compacting lightweight concrete is excellent in workability and has a lower density, a higher compressive strength and a relatively high elastic modulus than normal self-compacting concrete using the same design principles.
引用
收藏
页码:45 / 50
页数:6
相关论文
共 16 条
[1]  
Banfill P.F.G., 1994, CONSTR BUILD MATER, V8, P43, DOI [10.1016/0950-0618(94)90007-8, DOI 10.1016/0950-0618(94)90007-8]
[2]  
*BRIT STAND I, 1997, 3892 BS BRIT STAND 1
[3]  
*BRIT STAND I, 1992, 882 BS BRIT STAND I
[4]  
*BRIT STAND I, 1996, 12 BS BRIT STAND I
[5]  
Chandra S., 2002, Lightweight aggregate concrete
[6]  
Ferraris C., 2001, Materials Science of Concrete VI
[7]   Durability design and performance of self-consolidating lightweight concrete [J].
Hwang, CL ;
Hung, MF .
CONSTRUCTION AND BUILDING MATERIALS, 2005, 19 (08) :619-626
[8]   Influence of aggregate pre-wetting and fly ash on mechanical properties of lightweight concrete [J].
Lo, TY ;
Cui, HZ ;
Li, ZG .
WASTE MANAGEMENT, 2004, 24 (04) :333-338
[9]  
Okamura H., 2003, J ADV CONCR TECHNOL, V1, P5, DOI [10.1016/B978-075065686-3/50295-0., DOI 10.3151/JACT.1.5]
[10]  
OUCHI M, 2003, P INT S HIGH PERF CO