Studies on heat transfer in flow of silver nanofluid through a straight tube with twisted tape inserts

被引:10
|
作者
Waghole, D. R. [1 ]
Warkhedkar, R. M. [1 ]
Kulkarni, V. S. [1 ]
Shrivastva, R. K. [1 ]
机构
[1] Govt Coll Engn, Dept Mech Engn, Aurangabad, Maharashtra, India
关键词
Heat convection - Reynolds number - Tribology - Tubes (components) - Nanofluidics - Friction;
D O I
10.1007/s00231-015-1563-x
中图分类号
O414.1 [热力学];
学科分类号
摘要
Convective heat transfer in the flow of silver nanofluid through a straight tube with twisted tape inserts was investigated experimentally. This straight tube was used as absorber/receiver tube in parabolic trough collector. The experiments were conducted for Reynolds number range 500 < Re < 6000 with twisted tape inserts of different twist ratio range 0.577 < H/D < 1.732. This experimental study shows that twisted tape inserts enhances heat transfer rate in the tube. The heat transfer coefficient and friction factor in the flow of silver nanofliud with 5 % volume fraction (concentration) are higher compared to the flow of water. From this study, Nusselt number, friction factor and enhancement factor are found as 2.0-3.0 times, 10-48.5 and 135-175 %, respectively with silver nanofliud. Finally new possible correlations for predicting heat transfer and friction factor in the flow of silver nanofliud through the straight tube with twisted tape inserts are proposed.
引用
收藏
页码:309 / 313
页数:5
相关论文
共 50 条
  • [1] Studies on heat transfer in flow of silver nanofluid through a straight tube with twisted tape inserts
    D. R. Waghole
    R. M. Warkhedkar
    V. S. Kulkarni
    R. K. Shrivastva
    Heat and Mass Transfer, 2016, 52 : 309 - 313
  • [2] Effect of twisted-tape inserts and nanofluid on flow field and heat transfer characteristics in a tube
    He, Wei
    Toghraie, Davood
    Lotfipour, Amin
    Pourfattah, Farzad
    Karimipour, Arash
    Afrand, Masoud
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2020, 110
  • [3] Heat transfer and nanofluid flow characteristics through a circular tube fitted with helical tape inserts
    Sadeghi, Omidreza
    Mohammed, H. A.
    Bakhtiari-Nejad, Marjan
    Wahid, M. A.
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2016, 71 : 234 - 244
  • [4] Heat Transfer Enhancement of Nanofluid Flow in a Tube Equipped with Rotating Twisted Tape Inserts: A Two-Phase Approach
    Mashayekhi, Ramin
    Arasteh, Hossein
    Talebizadehsardari, Pouyan
    Kumar, Apurv
    Hangi, Morteza
    Rahbari, Alireza
    HEAT TRANSFER ENGINEERING, 2022, 43 (07) : 608 - 622
  • [5] Flow Boiling Heat Transfer with Twisted Tape Inserts
    Shatto, D. P.
    Peterson, G. P.
    JOURNAL OF ENHANCED HEAT TRANSFER, 2017, 24 (1-6) : 21 - 45
  • [6] Laminar convective heat transfer with twisted tape inserts in a tube
    Sarma, PK
    Subramanyam, T
    Kishore, PS
    Rao, VD
    Kakac, S
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2003, 42 (09) : 821 - 828
  • [7] Numerical investigations on flow and heat transfer characteristics of a tube equipped with twisted tape inserts
    Arsha, J. D.
    Ramakumar, B. V. N.
    Praveen, Tayal
    Padmanabhan, K.
    2013 INTERNATIONAL CONFERENCE ON ENERGY EFFICIENT TECHNOLOGIES FOR SUSTAINABILITY (ICEETS), 2013,
  • [8] CFD study of heat transfer enhancement and fluid flow characteristics of turbulent flow through tube with twisted tape inserts
    Tusar, Mehedi
    Noman, Abdullah
    Islam, Majedul
    Yarlagadda, Prasad
    Salam, Bodius
    2ND INTERNATIONAL CONFERENCE ON ENERGY AND POWER (ICEP2018), 2019, 160 : 715 - 722
  • [9] Heat transfer and friction factor characteristics in turbulent flow through a tube fitted with perforated twisted tape inserts
    Bhuiya, M. M. K.
    Chowdhury, M. S. U.
    Saha, M.
    Islam, M. T.
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2013, 46 : 49 - 57
  • [10] Comparison of convective heat transfer coefficient and friction factor of TiO2 nanofluid flow in a tube with twisted tape inserts
    Azmi, W. H.
    Sharma, K. V.
    Sarma, P. K.
    Mamat, Rizalman
    Anuar, Shahrani
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2014, 81 : 84 - 93