Extended FEM analysis of fatigue crack growth in Ti-6Al-4V orthopaedic plates

被引：6
作者：
Vucetic, Filip [1 ]
Colic, Katarina [1 ]
Grbovic, Aleksandar [2 ]
Radakovic, Zoran [2 ]
Sedmak, Simon [1 ]
机构：
[1] Innovat Ctr, Fac Mech Engn, Kraljice Marije 16, Belgrade 11120, Serbia
[2] Univ Belgrade, Fac Mech Engn, Kraljice Marije 16, Belgrade 11120, Serbia
来源：
1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1 | 2020年 / 28卷
关键词：
Fatigue Crack Growth; Locking Compression Plates; Extended Finite Element Method; Ti-6Al-4V; INTEGRITY ASSESSMENT; NUMERICAL-ANALYSIS; HIP IMPLANT;
D O I：
10.1016/j.prostr.2020.10.065
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
The extended finite element method (xFEM) was used to analyse fatigue crack growth in orthopaedic locking compression plates (LCP), made of Titanium alloy, Ti-6Al-4V, loaded in four-point bending. The optimal geometry was defined previously in respect to the remaining life of LCP used for patients with different body weights (BW - 60, 90 and 120 Kg). The plate with optimal geometry is analysed in more details here to assess the effect of BW and get better insight into fatigue crack growth path. (C) 2020 The Authors. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (https://creativecommons.org/licenses/by-nc-nd/4.0) Peer-review under responsibility of the European Structural Integrity Society (ESIS) ExCo
引用
收藏
页码：555 / 560
页数：6
相关论文
共 50 条
  • [21] Numerical Prediction of the Fatigue Crack Growth Rate in SLM Ti-6Al-4V Based on Crack Tip Plastic Strain
    Ferreira, Fabio F.
    Neto, Diogo M.
    Jesus, Joel S.
    Prates, Pedro A.
    Antunes, Fernando V.
    [J]. METALS, 2020, 10 (09) : 1 - 22
  • [22] Effects of various environments on fatigue crack growth in Laser formed and IM Ti-6Al-4V alloys
    Lee, EU
    Vasudevan, AK
    Sadananda, K
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2005, 27 (10-12) : 1597 - 1607
  • [23] Fatigue crack growth and crack closure behavior of Ti-6Al-4V alloy under variable-amplitude loadings
    Jono, M
    Sugeta, A
    Uematsu, Y
    [J]. ADVANCES IN FATIGUE CRACK CLOSURE MEASUREMENT AND ANALYSIS: VOL 2, 1999, 1343 : 265 - 284
  • [24] Fatigue life assessment of orthopedic plates made of Ti6Al4V
    Sedmak, Aleksandar
    Vucetic, Filip
    Colic, Katarina
    Grbovic, Aleksandar
    Sedmak, Simon
    Kirin, Snezana
    Berto, Filippo
    [J]. ENGINEERING FAILURE ANALYSIS, 2022, 137
  • [25] Modelling the Variability and the Anisotropic Behaviour of Crack Growth in SLM Ti-6Al-4V
    Jones, Rhys
    Rans, Calvin
    Iliopoulos, Athanasios P.
    Michopoulos, John G.
    Phan, Nam
    Peng, Daren
    [J]. MATERIALS, 2021, 14 (06)
  • [26] Fatigue Life and Crack Growth Behavior of Ti-6Al-4V Fabricated via Laser Directed Energy Deposition
    Yadollahi, Aref
    Buiter, Leah
    Mahtabi, Mohammad J.
    Doude, Haley R.
    Rhee, Hongjoo
    Newman Jr, James C.
    [J]. MATERIALS PERFORMANCE AND CHARACTERIZATION, 2024,
  • [27] Effects of the building direction on fatigue crack growth behavior of Ti-6Al-4V manufactured by selective laser melting
    Sun, Wenbo
    Ma, Yu'e
    Ai, Xiaopeng
    Li, Jianghai
    [J]. ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY, 2018, 13 : 1020 - 1025
  • [28] Fatigue crack initiation and growth behavior of Ti-6Al-4V under non-proportional multiaxial loading
    Nakamura, H.
    Takanashi, M.
    Itoh, T.
    Wu, M.
    Shimizu, Y.
    [J]. INTERNATIONAL JOURNAL OF FATIGUE, 2011, 33 (07) : 842 - 848
  • [29] Effect of build direction on the fracture toughness and fatigue crack growth in selective laser melted Ti-6Al-4V
    Edwards, P.
    Ramulu, M.
    [J]. FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2015, 38 (10) : 1228 - 1236
  • [30] Fatigue crack growth behavior of off-axis Ti-6Al-4V/SCS-6 metal matrix composites
    Yasmin, A
    Bowen, P
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 356 (1-2): : 54 - 68
12345