The effects of ultrasonication on epoxy resin and its emulsion

Purpose The effects of ultrasonication on the epoxy resin and its emulsion were investigated to find out the changes in the M and molecular structure of epoxy, as well as its room temperature storage stability, centrifugal stability, particle size and its distribution and particle morphology more importantly with the influence of different ultrasonic irradiation time, power and temperature. Design/methodology/approach The emulsion was prepared using an emulsifier with epoxy resin and by using phase inversion after subjecting to ultrasound irradiation with a power of 200 W at 50 degrees C for 60 min. The changes in the epoxy resin and its emulsion induced by ultrasound were characterized by Ubbelohde viscometer, FT-IR, C-13-NMR, high-speed desktop centrifuge, laser particle size analyzer and transmission electron microscope. Findings The molecular weight of the epoxy resin was initially decreased and then stabilized by the increasing of ultrasonic irradiation time. The mole rate of the epoxy groups in epoxy molecular were decreased by about 14 per cent, resulting from ultrasonic irradiation. The particle size of the emulsion was decreased, while the particle size distribution became uniform in a certain time. The narrow distribution, stable and uniform of waterborne epoxy resin emulsion with more than 60 days room temperature storage period, 80 per cent of the supernatant volume, about 220 nm average particle size was gained with a power of 200 W at 50 degrees C for 60 min. Research limitations/implications To overcome the problems commonly encountered with an epoxy emulsion, for example, short storage period and wider particle size, which limit its practical application, the effects of ultrasonic irradiation on the epoxy resin and its emulsion, were investigated. As the stability of emulsion was improved with the introduction of ultrasonic irradiation, the application of epoxy emulsion was improved. Originality/value The room temperature storage stability and centrifugal stability of the emulsion were decreased by the mechanical method, and thus, the benefit of an in-depth understanding of the influence of ultrasonic treatment on epoxy resin and its emulsion could further promote the development of water-based coatings.