Fabrication of a High Porous Polyethylene Membrane Using BET as a Novel Diluent

被引:1
|
作者
Cho, Inhyun [1 ]
Lee, Soomi [1 ]
Kim, Chang Keun [1 ]
机构
[1] Chung Ang Univ, Sch Chem Engn & Mat Sci, Seoul 156756, South Korea
关键词
microporous polyethylene membrane; high porosity; BET; diluent; upper critical solution temperature; INDUCED PHASE-SEPARATION; POLYPROPYLENE MEMBRANES; THERMAL-STABILITY; BATTERIES; ENHANCEMENT;
D O I
10.7317/pk.2014.38.4.530
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
Polyethylene (PE) membranes having various porosities are used as microfilters and separators in lithium ion batteries. Membranes having a high porosity are required for use as separators in a large scale lithium ion secondary battery. In this study, BET was examined for use as a new nontoxic diluent for the fabrication of highly porous PE membranes by thermally induced phase separation process. It was confirmed that BET can be used as a new diluent for the fabrication of the PE membranes by exploring upper critical solution temperature type phase behavior of PE mixtures with BET. When the porosity of the membrane prepared from the PE/PO mixture was compared with that prepared from PE/BET mixture, the latter was about 1.8 times higher than the former.
引用
收藏
页码:530 / 534
页数:5
相关论文
共 50 条
  • [31] Performance of a membrane fabricated from high-density polyethylene waste for dye separation in water
    Zulfiani, Utari
    Junaidi, Afdhal
    Nareswari, Cininta
    Ali, Badrut Tamam Ibnu
    Jaafar, Juhana
    Widyanto, Alvin Rahmad
    Saiful
    Dharma, Hadi Nugraha Cipta
    Widiastuti, Nurul
    RSC ADVANCES, 2023, 13 (12) : 7789 - 7797
  • [32] BET surface area of carbonaceous adsorbents-Verification using geometric considerations and GCMC simulations on virtual porous carbon models
    Gauden, Piotr A.
    Terzyk, Artur P.
    Furmaniak, Sylwester
    Harris, Peter J. F.
    Kowalczyk, Piotr
    APPLIED SURFACE SCIENCE, 2010, 256 (17) : 5204 - 5209
  • [33] Dealloying of Quasi-High Entropy Alloys: Fabrication of Porous Noble Metals/Metal Oxides
    Meng, Ziying
    Zhou, Jun
    Qin, Chunling
    Wang, Zhifeng
    METALS, 2025, 15 (02)
  • [34] Effect of diluent polarity on membrane stability in the separation of trace Pd(II) from wastewater by HFSLM using LIX84-I
    Wongkaew, Kraiwith
    Paricharoen, Ura
    Phatanasri, Suphot
    Leepipatpiboon, Natchanun
    Lothongkum, Anchaleeporn W.
    JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, 2015, 21 : 212 - 220
  • [35] Fabrication and evaporation time investigation of water treatment membranes using green solvents and recycled polyethylene terephthalate
    Lu, David
    Babaniamansour, Parto
    Williams, Alex
    Opfar, Kassandra
    Nurick, Parker
    Escobar, Isabel C.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2022, 139 (35)
  • [36] Fabrication of sugarcane bagasse ester-based porous nanofiber membrane by electrospinning for efficient oil-water separation
    Chen, Wei
    Wang, Huihui
    Lan, Wu
    Zhang, Aiping
    Liu, Chuanfu
    INDUSTRIAL CROPS AND PRODUCTS, 2022, 187
  • [37] Current State-of-the-Art in Membrane Formation from Ultra-High Molecular Weight Polyethylene
    Basko, Andrey
    Pochivalov, Konstantin
    MEMBRANES, 2022, 12 (11)
  • [38] Tailoring novel fibrillar morphologies in poly(vinylidene fluoride) membranes using a low toxic triethylene glycol diacetate (TEGDA) diluent
    Cui, Zhaoliang
    Hassankiadeh, Naser Tavajohi
    Lee, Suk Young
    Woo, Kyung Taek
    Lee, Jong Myung
    Sanguineti, Aldo
    Arcella, Vincenzo
    Lee, Young Moo
    Drioli, Enrico
    JOURNAL OF MEMBRANE SCIENCE, 2015, 473 : 128 - 136
  • [39] Fabrication of high aspect ratio broadband antireflection porous nano-network on glass using candle soot as a sacrificial layer for solar energy utilization
    Kumar, Arvind
    Putta, Veerender
    Barshilia, Harish C.
    JOURNAL OF RENEWABLE AND SUSTAINABLE ENERGY, 2016, 8 (06)
  • [40] Eggshell Membrane-Templated Porous Gold Membranes Using Nanoparticles as Building Blocks
    Ashraf, Sumaira
    Khalid, Zafar Mahmood
    Hussain, Irshad
    JOURNAL OF THE CHEMICAL SOCIETY OF PAKISTAN, 2013, 35 (03): : 730 - 736