Bending of cord composite cylindrical shells

被引：10

作者：

Paris, AJ ^{[1
]}

Costello, GA ^{[1
]}

机构：

[1] Univ Illinois, Urbana, IL 61801 USA

来源：

JOURNAL OF APPLIED MECHANICS-TRANSACTIONS OF THE ASME | 2000年 / 67卷 / 01期

关键词：

D O I：

10.1115/1.321156

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

An analytical method for determining the load-deformation behavior of cord composite cylindrical shells is developed by considering the mechanics of the matrix, the cords, and the shell. To illustrate the method, a circular cylindrical shell with a single ply of uniformly spaced cords parallel to the shell axis is considered. The differential equations for the displacements are derived. These equations are solved analytically in closed form for a shell with the cords on the middle surface and subjected to axisymmetric loading. The deformations are strongly dependent upon the properties of the constituents, including the extension-twist coupling of the cords, and the geometry, boundary conditions, and loading. [S0021-8936(00)02701-X].

引用

页码：117 / 127

页数：11

共 50 条

[11] Bending boundary layers in laminated-composite circular cylindrical shells
Nemeth, MP
Smeltzer, SS
COLLECTION OF THE 41ST AIAA/ASME/ASCE/AHS/ASC STRUCTURES, STRUCTURAL DYNAMICS, AND MATERIALS CONFERENCE AND EXHIBIT, VOL 1 PTS 1-3, 2000, : 1614 - 1645
[12] ON THE BENDING OF ORTHOTROPIC CYLINDRICAL SHELLS
DAS, YC
JOURNAL OF THE AEROSPACE SCIENCES, 1961, 28 (08): : 661 - 663
[13] Instability of delaminated composite cylindrical shells under combined axial compression and bending
Tafreshi, Azam
COMPOSITE STRUCTURES, 2008, 82 (03) : 422 - 433
[14] The bending behaviour of externally pressurised metallic cylindrical shells reinforced with composite rings
Zuo, Xinlong
Tang, Wenxian
Li, Yongsheng
SHIPS AND OFFSHORE STRUCTURES, 2025,
[15] DYNAMIC BUCKLING OF METAL-MATRIX COMPOSITE PLATES AND SHELLS UNDER CYLINDRICAL BENDING
GILAT, R
ABOUDI, J
COMPOSITE STRUCTURES, 1994, 28 (04) : 459 - 469
[16] INSTABILITY OF SHORT STIFFENED COMPOSITE CYLINDRICAL-SHELLS UNDER BENDING WITH PREBUCKLING DISPLACEMENTS
VILLHARD, V
BANG, C
PALAZOTTO, AN
COMPUTERS & STRUCTURES, 1983, 16 (06) : 773 - 775
[17] Geometrically nonlinear bending of stiffened composite skewed cylindrical shells under transverse pressure
Giri, Ashish
Bakshi, Kaustav
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2024, 59 (02) : 85 - 99
[18] Isogeometric nonlinear bending and instability analysis of cylindrical composite shells reinforced with graphene platelets
Do, Vuong Nguyen Van
Lee, Chin-Hyung
COMPOSITE STRUCTURES, 2021, 258
[19] The dynamics of composite cylindrical shells
Palazotto, A.N.
Naboulsi, S.K.
Forral, A.E.
American Society of Mechanical Engineers, Applied Mechanics Division, AMD, 2000, 238 : 129 - 132
[20] BUCKLING OF CIRCULAR CYLINDRICAL COMPOSITE SHELLS UNDER AXIAL-COMPRESSION AND BENDING LOADS
LOU, KA
YANIV, G
JOURNAL OF COMPOSITE MATERIALS, 1991, 25 (02) : 162 - 187

← 1 2 3 4 5 →