Remarkably improved toughness and thermal stability of poly (vinyl chloride) (PVC)/poly (α-methylstyrene-acrylonitrile) (α-MSAN) blend with the assistance of two impact modifiers

被引：15
作者：
Zhang, Zhen [1 ]
Wang, Shichao [1 ]
Zhang, Jun [1 ]
Zhu, Wenqiang [1 ]
Tian, Tingsheng [1 ]
机构：
[1] Nanjing Tech Univ, Coll Mat Sci & Engn, Nanjing 210009, Jiangsu, Peoples R China
来源：
POLYMER TESTING | 2016年 / 51卷
关键词：
Poly(vinyl chloride); Toughening; Thermal stability; Stiffness; CHLORINATED POLYETHYLENE; POLY(VINYL CHLORIDE); DEGRADATION; COPOLYMER; PHASE; NANOCOMPOSITES; PARTICLES; DIOXIDE;
D O I：
10.1016/j.polymertesting.2016.02.003
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The key drawback of impact modifier-toughened polymer is that the improved toughness is accompanied by loss in stiffness. Surprisingly, poly (vinyl chloride) (PVC)/poly (alpha-methylstyrene-acrylonitrile) (alpha-MSAN) blend was toughened without loss in stiffness by simply combining two impact modifiers chlorinated polyethylene (CPE) and acrylic resin (ACR). The prepared blend's impact strength was 3.0 times higher than PVC/alpha-MSAN/CPE blend and 18.6 times higher than pure PVC/alpha-MSAN blend. An impressive thermal stabilizing effect was also achieved when CPE and ACR were combined. The improved, toughness could be attributed to the overlap of the stress field between different impact modifiers, which help to form the continuum percolation of stress volume under impact loading. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1 / 5
页数：5
相关论文
共 23 条
[1]   Thermo-mechanical characterization of bioblends from polylactide and poly(butylene adipate-co-terephthalate) and lignin [J].
Abdelwahab, Mohamed A. ;
Taylor, Sarah ;
Misra, Manjusri ;
Mohanty, Amar K. .
MACROMOLECULAR MATERIALS AND ENGINEERING, 2015, 300 (03) :299-311
[2]   Fracture-induced activation in mechanophore-linked, rubber toughened PMMA [J].
Celestine, Asha-Dee N. ;
Beiermann, Brett A. ;
May, Preston A. ;
Moore, Jeffrey S. ;
Sottos, Nancy R. ;
White, Scott R. .
POLYMER, 2014, 55 (16) :4164-4171
[3]   Polymer Blend Nanocomposites: Effect of Selective Nanotube Location on the Properties of a Semicrystalline Thermoplastic-Toughened Epoxy Thermoset [J].
Diez-Pascual, Ana M. ;
Shuttleworth, Peter S. ;
Gonzalez-Castillo, Eduin I. ;
Marco, Carlos ;
Gomez-Fatou, Marian A. ;
Ellis, Gary .
MACROMOLECULAR MATERIALS AND ENGINEERING, 2014, 299 (12) :1430-1444
[4]   TiO2 loaded on graphene nanosheet as reinforcer and its effect on the thermal behaviors of poly(vinyl chloride) composites [J].
Feng, Xiaming ;
Xing, Weiyi ;
Song, Lei ;
Hu, Yuan ;
Liew, Kim Meow .
CHEMICAL ENGINEERING JOURNAL, 2015, 260 :524-531
[5]   Simultaneously Enhancing Mechanical Properties and Melt Flow Ability of Polyamide 6 by Blending with a Hyperbranched Polymer [J].
Han, Keqing ;
Zhang, Xiong ;
Zhan, Shan ;
Yu, Muhuo .
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, 2011, 50 (02) :225-235
[6]   Mechanical properties of cellulose nanofiber (CNF) reinforced polylactic acid (PLA) prepared by twin screw extrusion [J].
Jonoobi, Mehdi ;
Harun, Jalaluddin ;
Mathew, Aji P. ;
Oksman, Kristiina .
COMPOSITES SCIENCE AND TECHNOLOGY, 2010, 70 (12) :1742-1747
[7]   Synthesis, characterization, and enzymatic degradation of starch-grafted poly(methyl methacrylate) copolymer films [J].
Li, Mei-Chun ;
Lee, Jae Kwang ;
Cho, Ur Ryong .
JOURNAL OF APPLIED POLYMER SCIENCE, 2012, 125 (01) :405-414
[8]   Toughening of vinyl ester resin using butadiene-acrylonitrile rubber modifiers [J].
Robinette, EJ ;
Ziaee, S ;
Palmese, GR .
POLYMER, 2004, 45 (18) :6143-6154
[9]   Nanocomposite film prepared by depositing xylan on cellulose nanowhiskers matrix [J].
Sun, Qining ;
Mandalika, Anurag ;
Elder, Thomas ;
Nair, Sandeep S. ;
Meng, Xianzhi ;
Huang, Fang ;
Ragauskas, Art J. .
GREEN CHEMISTRY, 2014, 16 (07) :3458-3462
[10]   A novel method of producing lightweight microcellular injection molded parts with improved ductility and toughness [J].
Sun, Xiaofei ;
Kharbas, Hrishikesh ;
Peng, Jun ;
Turng, Lih-Sheng .
POLYMER, 2015, 56 :102-110
123