NUMERICALLY UNDERSTAND THE COMBINED EFFECT OF TIP CLEARANCE AND CIRCUMFERENTIAL GROOVES CASING TREATMENT ON THE PERFORMANCE OF SINGLE STAGE TRANSONIC AXIAL FLOW COMPRESSOR

This paper deals with the numerical studies on the combined effect of tip clearance and axisymmetric circumferential grooves casing treatment (CGCT) on the overall performance and stall margin of a single stage transonic axial flow compressor. Steady state numerical analysis was carried out by solving three dimensional Reynolds-averaged-Navier-Stokes (RANS) Equations using the Shear Stress Transport (SST) k-omega Turbulence Model. The numerical stall inception point was identified from the last converged point by the convergence criteria, and the stall margin was numerically predicted. Additionally, the stall margin and the isentropic peak stage efficiencies of the circumferential casing grooves with various tip clearances were compared and evaluated in order to explore the influence of the tip clearance. Results obtained were compared with those obtained on the baseline compressor with the smooth casing (SC). Further computational studies were conducted to study the role of the tip leakage flow in axial compressor in triggering the stall. The relationship between the tip clearance flow, flow field and surge margin extension from circumferential groove casing treatment with various rotor tip clearances were studied numerically. The application of the circumferential groove casing treatment with varying clearance leads to significant improvement in the operating stability of compressor with slight reduction in the isentropic peak stage efficiency for small tip clearances, whereas there was slight increment in the isentropic peak stage efficiency at higher tip clearance of 2.5mm.