Effect of different etching periods on the bond strength of a composite resin to a machinable porcelain

Objectives: The purpose of this study was to evaluate microstructure changes of Cerec 2 Vitablocs Mark II porcelain etched by a 5% hydrofluoric acid and examine the effect of different etching times on the bond strength between the porcelain and a composite resin. Methods: Six different etching times (0, 5, 30, 60, 120 and 180 s) were used to etch the surfaces of the porcelain, respectively. Etched relief patterns were observed by means of a scanning electron microscope and the bond strength was determined between a dual-cured composite luting agent and the porcelain. Results: The results showed that composite resin did not bond to unetched porcelain but bonded to etched porcelain, the 120 s etch giving the highest bond strength. Conclusion: The bond strength values corresponded well to the microstructure changes caused by etching. (C) 1997 Elsevier Science Ltd.