Effect of Laser Remelting on Microstructure and Properties of AlCoCrFeNi High-Entropy Alloy Coating

被引：27
作者：
Liu, Qi [1 ]
Dong, Tian-shun [1 ,2 ]
Fu, Bin-guo [1 ]
Li, Guo-lu [1 ]
Yang, Li-jun [3 ]
机构：
[1] Hebei Univ Technol, Sch Mat Sci & Engn, Tianjin 300130, Peoples R China
[2] Hebei Wear Resistant Met Casting Technol Innovat, Chengde 067000, Hebei, Peoples R China
[3] Tianjin Univ, Sch Mat Sci & Engn, Tianjin 300130, Peoples R China
来源：
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE | 2021年 / 30卷 / 08期
基金：
中国国家自然科学基金;
关键词：
high-entropy alloy coating; laser remelting; mechanical properties; plasma spraying; wear resistance; CORROSION PROPERTY; WEAR; BEHAVIOR; PERFORMANCE; EVOLUTION; SUBSTRATE; X=0;
D O I：
10.1007/s11665-021-05806-0
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A high-entropy alloy coating of AlCoCrFeNi was prepared by plasma spraying and then remelted via laser remelting. The effect of laser remelting on the microstructure, mechanical properties and wear resistance of the AlCoCrFeNi coating was investigated. Particularly, the effect of surface free energy on the wear resistance of the coatings before and after remelting was explored. The results showed that the remelted AlCoCrFeNi coating retained the same single BCC solid solution structure as the as-sprayed AlCoCrFeNi coating. Besides, the defects in the coating were basically eliminated by laser remelting, leading to the porosity of the coating decreased from 4.8 to only 0.3%. Consequently, the hardness, elastic modulus and fracture toughness of the coating were enhanced by 38%, and the wear loss of the remelted AlCoCrFeNi coating was only 22% of that of the as-sprayed one. Therefore, laser remelting is a feasible method to improve the microstructure and enhance the wear resistance of the AlCoCrFeNi high-entropy alloy coating.
引用
收藏
页码：5728 / 5735
页数：8
相关论文
共 33 条
[31]   Microstructures and properties of high-entropy alloys [J].
Zhang, Yong ;
Zuo, Ting Ting ;
Tang, Zhi ;
Gao, Michael C. ;
Dahmen, Karin A. ;
Liaw, Peter K. ;
Lu, Zhao Ping .
PROGRESS IN MATERIALS SCIENCE, 2014, 61 :1-93
[32]   Characterization of microstructure and rolling contact fatigue performance of NiCrBSi/WC-Ni composite coatings prepared by plasma spraying [J].
Zhang, Z. Q. ;
Wang, H. D. ;
Xu, B. S. ;
Zhang, G. S. .
SURFACE & COATINGS TECHNOLOGY, 2015, 261 :60-68
[33]   Microstructure and chloride corrosion property of nanocrystalline AlTiCrNiTa high entropy alloy coating on X80 pipeline steel [J].
Zhao, Sha ;
He, Lin-xin ;
Fan, Xiao-xia ;
Liu, Chun-hai ;
Long, Jian-ping ;
Wang, Long ;
Chang, Hong ;
Wang, Jian ;
Zhang, Wei .
SURFACE & COATINGS TECHNOLOGY, 2019, 375 :215-220
1234