Re-forming end-of-life components through single point incremental forming

被引：12
作者：
Ingarao, Giuseppe [1 ]
Zaheer, Omer [1 ]
Campanella, Davide [1 ]
Fratini, Livan [1 ]
机构：
[1] Univ Palermo, Dept Engn, Viale Sci, I-90128 Palermo, Italy
来源：
MANUFACTURING LETTERS | 2020年 / 24卷 / 24期
关键词：
Incremental sheet forming; Reshaping; Aluminium alloys; Thinning; Strain analyses; SHEET-METAL;
D O I：
10.1016/j.mfglet.2020.05.001
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Applying Circular Economy strategies is mandatory to face material demand while minimizing the environmental impact. Manufacturing processes are to be thought as means to enable material/component reuse strategies. This paper presents the suitability of Single Point Incremental Forming (SPIF) to reform End-of-life sheet metal components. Deep drawing followed by SPIF process on aluminium alloys were carried out to simulate reforming processes chain. The resulting thinning and strain distributions were experimentally analysed for different configurations. The research proves that the local action and enhanced formability nature of SPIF allow non-homogeneously thinned and reduced formability parts to be successfully re-formed. (C) 2020 Society of Manufacturing Engineers (SME). Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：132 / 135
页数：4
相关论文
共 16 条
  • [1] INNOVATION BY FORMING TECHNOLOGY: MOTIVATION FOR RESEARCH
    Brosius, A.
    Hermes, M.
    Ben Khalifa, N.
    Trompeter, M.
    Tekkaya, A. E.
    [J]. INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2009, 2 : 29 - 38
  • [2] Analytical modeling and experimental validation of the forming force in several typical incremental sheet forming processes
    Chang, Zhidong
    Li, Ming
    Chen, Jun
    [J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2019, 140 : 62 - 76
  • [3] Reusing Steel and Aluminum Components at End of Product Life
    Cooper, Daniel R.
    Allwood, Julian M.
    [J]. ENVIRONMENTAL SCIENCE & TECHNOLOGY, 2012, 46 (18) : 10334 - 10340
  • [4] Single point incremental forming: state-of-the-art and prospects
    Duflou, Joost R.
    Habraken, Anne-Marie
    Cao, Jian
    Malhotra, Rajiv
    Bambach, Markus
    Adams, Dave
    Vanhove, Hans
    Mohammadi, Amirahmad
    Jeswiet, Jack
    [J]. INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2018, 11 (06) : 743 - 773
  • [5] Environmental assessment of solid state recycling routes for aluminium alloys: Can solid state processes significantly reduce the environmental impact of aluminium recycling?
    Duflou, Joost R.
    Tekkaya, A. Erman
    Haase, Matthias
    Welo, Torgeir
    Vanmeensel, Kim
    Kellens, Karel
    Dewulf, Wim
    Paraskevas, Dimos
    [J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2015, 64 (01) : 37 - 40
  • [6] On-line control of single point incremental forming operations through punch force monitoring
    Filice, L.
    Ambrogio, G.
    Micari, F.
    [J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2006, 55 (01) : 245 - 248
  • [7] Influence of mechanical properties of the sheet material on formability in single point incremental forming
    Fratini, L
    Ambrogio, G
    Di Lorenzo, R
    Filice, L
    Micari, F
    [J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2004, 53 (01) : 207 - 210
  • [8] FRATINI L, 2008, STEEL RES INT, P77
  • [9] Forming limit curves in Single Point Incremental Forming
    Ham, M.
    Jeswiet, J.
    [J]. CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2007, 56 (01) : 277 - 280
  • [10] Mechanics of fracture in single point incremental forming
    Malhotra, Rajiv
    Xue, Liang
    Belytschko, Ted
    Cao, Jian
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2012, 212 (07) : 1573 - 1590
12