Cold gas dynamic spraying of a high temperature Al alloy

被引：70
作者：
Ajdelsztajn, L. [1 ]
Zuniga, A.
Jodoin, B.
Lavernia, E. J.
机构：
[1] Univ Calif Davis, Dept Chem Engn & Mat Sci, Davis, CA 95616 USA
[2] Univ Ottawa, Dept Mech Engn, Ottawa, ON K1N 6N5, Canada
来源：
SURFACE & COATINGS TECHNOLOGY | 2006年 / 201卷 / 06期
关键词：
cold gas dynamic spray; high temperature Al alloys; coatings;
D O I：
10.1016/j.surfcoat.2005.06.001
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The present paper describes a study of the influence of cold spraying on the microstructure, heat treatment response and mechanical behavior of a high temperature 2618 aluminum alloy (Al-Cu-Mg-Fe-Ni) modified with 0.16 wt.% Sc. The microstructure of the starting powder consisted of a network of Al2CuMg phase on the grain boundaries of the Al matrix, along with Al9FeNi precipitates for atomized powder particles larger than 20 mu m, and a cellular solidification structure for particles smaller than 20 Rm. The coating after deposition was composed of the same microstructure features as observed in the feedstock powder but highly deformed. The observed overall deformation suggests the occurrence of localized adiabatic shear instability at the particle/particle boundary and adiabatic deformation softening at the powder interior during splat formation. The coating hardness was similar to the one obtained at the peak aged condition (T6). The coating aging response was influenced by the presence of Al7FeCu2 particles that depleted the matrix from Cu, reducing the overall hardness and overcoming the benefits of Sc addition. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码：2109 / 2116
页数：8
相关论文
共 33 条
[1]   Cold spray deposition of nanocrystalline aluminum alloys [J].
Ajdelsztajn, L ;
Jodoin, B ;
Kim, GE ;
Schoenung, JM .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2005, 36A (03) :657-666
[2]   Gas-dynamic spraying. Study of a plane supersonic two-phase jet [J].
Alkhimov A.P. ;
Klinkov S.V. ;
Kosarev V.F. ;
Papyrin A.N. .
Journal of Applied Mechanics and Technical Physics, 1997, 38 (2) :324-330
[3]  
Allkimov A.P., 1994, U.S. Patent, Patent No. [5 302 414, 5302414]
[4]  
ASSADI H, 2002, ACTA MATER, P380
[5]  
BELOV NA, 2002, IRON ALUMINUM ALLOYS, P99
[6]  
CROSSLAND B, 1982, WELDING METALS APPL, P7
[7]   Impact of high velocity cold spray particles [J].
Dykhuizen, RC ;
Smith, MF ;
Gilmore, DL ;
Neiser, RA ;
Jiang, X ;
Sampath, S .
JOURNAL OF THERMAL SPRAY TECHNOLOGY, 1999, 8 (04) :559-564
[8]  
DYKHUIZEN RC, 2003, ITSC P, P19
[9]  
El-Sobky H., 1983, Explosive Welding, Forming and Compaction, P189, DOI [10.1007/978-94-011-9751-9_6, DOI 10.1007/978-94-011-9751-9_6]
[10]   ON THE STRUCTURES OF GUINIER-PRESTON ZONES IN AL-CU ALLOYS [J].
GEROLD, V .
SCRIPTA METALLURGICA, 1988, 22 (07) :927-932
1234