Study on the dynamic recrystallization behavior of Ti-alloy Ti-10V-2Fe-3V in β processing via experiment and simulation

被引：63
作者：
OuYang, D. L. [1 ,2 ]
Fu, M. W. [1 ]
Lu, S. Q. [2 ]
机构：
[1] Hong Kong Polytech Univ, Dept Mech Engn, Kowloon, Hong Kong, Peoples R China
[2] Nanchang Hangkong Univ, Sch Mat Sci & Engn, Nanchang, Peoples R China
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2014年 / 619卷
基金：
美国国家科学基金会;
关键词：
Ti-10V-2Fe-3V alloy; Dynamic recrystallization; Microstructure evolution; Cellular automaton; Finite element simulation; FATIGUE-CRACK GROWTH; MICROSTRUCTURE EVOLUTION; TITANIUM-ALLOYS; DEFORMATION-BEHAVIOR; FLOW;
D O I：
10.1016/j.msea.2014.09.067
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Hot compression tests of titanium alloy Ti-10V-2Fe-3V were performed at the temperature of 1098-1423 K and the strain rate of 0.001-1 s(-1) to examine the influence of deformation conditions over the dynamic recrystallization (DRX) of the Ti-alloy. The experimental results show the. occurrence of DRX with the bulging nucleation mechanism as a predominant mechanism in hot deformation of the alloy in beta-phase field. Partial grain refinement related to the incompletely DRX happened even after a large strain of 1.6. The simulation based on the established DRX kinetics model and a cellular automaton simulation approach coupled with the metallurgical principles of dynamical recrystallization and the practical parameters was conducted to predict the microstructure evolution with the completely DRX. The effects of strain rate and temperature on the steady state strain, volume fraction of DRX and the steady state grain size in DRX process were studied, and a satisfactory agreement between the predicted and experimental results was obtained. The research thus provides an approach to investigate and predict the DRX and microstructure evolution of Ti-alloys in hot working process. (C) 2014 Elsevier B.V. All rights reserved.
引用
收藏
页码：26 / 34
页数：9
相关论文
共 36 条
[1]  
Ashby M.F., 1982, DEFORMATION MECH MAP
[2]   Deformation behaviour of beta titanium alloy Ti-10V-4.5Fe-1.5Al in hot upset forging [J].
Balasubrahmanyam, VV ;
Prasad, YVRK .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 336 (1-2) :150-158
[3]   MICROSTRUCTURE AND TENSILE DUCTILITY IN A BETA-HEAT TREATED TITANIUM-ALLOY [J].
BANERJEE, D ;
MUKHERJEE, D ;
SAHA, RL ;
BOSE, K .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1983, 14 (03) :413-420
[4]  
BANIA PJ, 1994, JOM-J MIN MET MAT S, V46, P16, DOI 10.1007/BF03220742
[5]   Deformation behavior and mechanisms of Ti-1023 alloy [J].
Bao, RQ ;
Huang, X ;
Cao, CX .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2006, 16 (02) :274-280
[6]   An overview on the use of titanium in the aerospace industry [J].
Boyer, RR .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1996, 213 (1-2) :103-114
[7]   Effects of microstructural parameters on the fatigue crack growth of fully lamellar γ-TiAl alloys [J].
Choi, C ;
Kim, HJ ;
Lee, YT ;
Kim, YW ;
Lee, CS .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 329 :545-556
[8]   THE DEPENDENCE OF GRAIN-SIZE ON STRESS DURING DYNAMIC RECRYSTALLIZATION [J].
DERBY, B .
ACTA METALLURGICA ET MATERIALIA, 1991, 39 (05) :955-962
[9]   Microstructural modelling of dynamic recrystallisation using an extended cellular automaton approach [J].
Ding, R ;
Guo, ZX .
COMPUTATIONAL MATERIALS SCIENCE, 2002, 23 (1-4) :209-218
[10]   Coupled quantitative simulation of microstructural evolution and plastic flow during dynamic recrystallization [J].
Ding, R ;
Guo, ZX .
ACTA MATERIALIA, 2001, 49 (16) :3163-3175
1234