Evaluation of Hot Corrosion Behavior of HVOF Thermally Sprayed Cr3C2-35NiCr Coating on SS 304 Boiler Tube Steel

被引:26
|
作者
Madhu, G. [1 ]
Swamy, K. M. Mrityunjaya [2 ]
Kumar, Durga Ajay [1 ]
Prasad, C. Durga [3 ]
Harish, U. [1 ]
机构
[1] KS Inst Technol, Dept Mech Engn, Bengaluru, Karnataka, India
[2] DavanandaSagar Univ, Dept Mech Engn, Bengaluru, Karnataka, India
[3] RV Inst Technol & Management, Dept Mech Engn, Bengaluru, Karnataka, India
来源
ADVANCED TRENDS IN MECHANICAL AND AEROSPACE ENGINEERING (ATMA-2019) | 2021年 / 2316卷
关键词
Boiler tube steel; HVOF coating; Hot corrosion; Thermo gravimetric analysis; FE-BASED SUPERALLOYS; OXIDATION; MICROSTRUCTURE; RESISTANCE; WEAR;
D O I
10.1063/5.0038279
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
In the present work, the commercially available Cr3C2-35%NiCr coating powder is deposited by using HVOF thermally sprayed coating on SS 304 Boiler tube steel. The hot corrosion study is conducted on commercially available Cr3C2-35%NiCr coated SS 304 boiler tube steel and uncoated SS 304 boiler tube steel at 800 degrees C in Na2SO4-60%V2O5 boiler environment with cyclic conditions. The thermo gravimetric method is used to establish the kinetics of hot corrosion by means of weight change method. The commercially available Cr3C2-35%NiCr coated specimen shows very less weight gain as compared to the uncoated specimen. The superior hot corrosion resistance obtained due to the formation of oxide layers consisting of Cr3O3, Cr2O4 & NiO. The uncoated specimen degrades at a faster rate in the form of layer of spalls. The microstructural analysis is examined by using X-ray diffraction (XRD) & scanning electron microscopy (SEM) is used to determine the coating morphology and corrosion products.
引用
收藏
页数:8
相关论文
共 50 条
  • [1] The effects of post-treatment on the hot corrosion behavior of the HVOF-sprayed Cr3C2-NiCr coating
    Chatha, Sukhpal Singh
    Sidhu, Hazoor S.
    Sidhu, Buta S.
    SURFACE & COATINGS TECHNOLOGY, 2012, 206 (19-20) : 4212 - 4224
  • [2] Hot corrosion behavior of HVOF-sprayed Cr3C2-WC-NiCoCrMo coating
    Zhou, Wuxi
    Zhou, Kesong
    Deng, Chunming
    Zeng, Keli
    Li, Yuxi
    CERAMICS INTERNATIONAL, 2017, 43 (12) : 9390 - 9400
  • [3] Hot-corrosion behaviour of CNT reinforced Cr3C2-NiCr coatings working under high-temperature sprayed by HVOF method
    Kuruba, Manjunatha
    Gaikwad, Giridhara
    Shivalingappa, D.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2022, 236 (12) : 2372 - 2383
  • [4] Structural characteristics and wear, oxidation, hot corrosion behaviors of HVOF sprayed Cr3C2-NiCr hardmetal coatings
    Ozkan, Dervis
    SURFACE & COATINGS TECHNOLOGY, 2023, 457
  • [5] High-Temperature Corrosion Studies of HVOF-Sprayed Cr3C2-NiCr Coating on SAE-347H Boiler Steel
    Kaur, Manpreet
    Singh, Harpreet
    Prakash, Satya
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2009, 18 (04) : 619 - 632
  • [6] High-Temperature Corrosion Studies of HVOF-Sprayed Cr3C2-NiCr Coating on SAE-347H Boiler Steel
    Manpreet Kaur
    Harpreet Singh
    Satya Prakash
    Journal of Thermal Spray Technology, 2009, 18 : 619 - 632
  • [7] Microstructural characterization and cyclic oxidation behavior of HVOF-sprayed Cr3C2-NiCr coating on Boiler steel at elevated temperature
    Shukla, V.N.
    Jayaganthan, R.
    Tewari, V.K.
    Materials Science Forum, 2013, 736 : 289 - 300
  • [8] Hot corrosion studies of HVOF-sprayed Cr3C2-NiCr coating on 310S stainless steel in an actual environment of a coal fired boiler
    Shukla, V. N.
    Jayaganthan, R.
    Tewari, V. K.
    ADVANCES IN MATERIALS AND PROCESSING: CHALLENGES AND OPPORTUNITIES, 2012, 585 : 483 - 487
  • [9] Hot Corrosion Studies of HVOF-Sprayed Coating on T-91 Boiler Tube Steel at Different Operating Temperatures
    Bhatia, Rakesh
    Singh, Hazoor
    Sidhu, Buta Singh
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2014, 23 (02) : 493 - 505
  • [10] Hot corrosion behaviour of HVOF-sprayed Cr3C2-NiCrMoNbAl coating
    Zhou, Wuxi
    Zhou, Kesong
    Deng, Chunming
    Zeng, Keli
    Li, Yuxi
    SURFACE & COATINGS TECHNOLOGY, 2017, 309 : 849 - 859