Quasi-static and ratcheting properties of trabecular bone under uniaxial and cyclic compression

被引:11
作者
Gao Li-Lan [1 ]
Wei Chao-lei [1 ]
Zhang Chun-Qiu [1 ]
Gao Hong [2 ]
Yang Nan [1 ]
Dong Li-Min [1 ]
机构
[1] Tianjin Univ Technol, Sch Mech Engn, Tianjin Key Lab Design & Intelligent Control Adv, Tianjin, Peoples R China
[2] Tianjin Univ, Sch Chem Engn & Technol, Tianjin, Peoples R China
来源
MATERIALS SCIENCE AND ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS | 2017年 / 77卷
基金
中国国家自然科学基金;
关键词
Trabecular bone; Creep property; Rate-dependent property; Ratcheting behavior; Theoretical model; CANCELLOUS BONE; MECHANICAL-PROPERTIES; FAILURE BEHAVIORS; CREEP-BEHAVIOR; MODEL; STRENGTH; DAMAGE; DENSITY; SOLDER; PTFE;
D O I
10.1016/j.msec.2017.03.214
中图分类号
TB3 [工程材料学]; R318.08 [生物材料学];
学科分类号
0805 ; 080501 ; 080502 ;
摘要
The quasi-static and ratcheting properties of trabecular bone were investigated by experiments and theoretical predictions. The creep tests with different stress levels were completed and it is found that both the creep strain and creep compliance increase rapidly at first and then increase slowly as the creep time goes by. With increase of compressive stress the creep strain increases and the creep compliance decreases. The uniaxial compressive tests show that the applied stress rate makes remarkable influence on the compressive behaviors of trabecular bone. The Young's modulus of trabecular bone increases with increase of stress rate. The stress-strain hysteresis loops of trabecular bone under cyclic load change from sparse to dense with increase of number of cycles, which agrees with the change trend of ratcheting strain. The ratcheting strain rate rapidly decreases at first, and then exhibits a relatively stable and small value after 50 cycles. Both the ratcheting strain and ratcheting strain rate increase with increase of stress amplitude or with decrease of stress rate. The creep model and the nonlinear viscoelastic constitutive model of trabecular bone were proposed and used to predict its creep property and rate-dependent compressive property. The results show that there are good agreements between the experimental data and predictions. (C) 2017 Elsevier B.V. All rights reserved.
引用
收藏
页码:1050 / 1059
页数:10
相关论文
共 42 条
[1]  
[Anonymous], BONE MECH HDB
[2]  
[Anonymous], T SOC RHEOL
[3]   COMPRESSIVE CREEP-BEHAVIOR OF BOVINE TRABECULAR BONE [J].
BOWMAN, SM ;
KEAVENY, TM ;
GIBSON, LJ ;
HAYES, WC ;
MCMAHON, TA .
JOURNAL OF BIOMECHANICS, 1994, 27 (03) :301-&
[4]   BONE COMPRESSIVE STRENGTH - INFLUENCE OF DENSITY AND STRAIN RATE [J].
CARTER, DR ;
HAYES, WC .
SCIENCE, 1976, 194 (4270) :1174-1176
[5]   Uniaxial ratcheting behavior of 63Sn37Pb solder with loading histories and stress rates [J].
Chen, G ;
Chen, X ;
Niu, CD .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 421 (1-2) :238-244
[6]   Ratcheting behavior of PTFE under cyclic compression [J].
Chen, X ;
Hui, SC .
POLYMER TESTING, 2005, 24 (07) :829-833
[7]   Experimental study on ratcheting behavior of eutectic tin-lead solder under multiaxial loading [J].
Chen, X ;
Yu, DH ;
Kim, KS .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 406 (1-2) :86-94
[8]   Bone fracture characterization using the end notched flexure test [J].
Dourado, N. ;
Pereira, F. A. M. ;
de Moura, M. F. S. F. ;
Morais, J. J. L. ;
Dias, M. I. R. .
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2013, 33 (01) :405-410
[9]   MECHANICAL-BEHAVIOR OF INTRACONDYLAR CANCELLOUS BONE OF FEMUR AT DIFFERENT LOADING RATES [J].
DUCHEYNE, P ;
HEYMANS, L ;
MARTENS, M ;
AERNOUDT, E ;
DEMEESTER, P ;
MULIER, JC .
JOURNAL OF BIOMECHANICS, 1977, 10 (11-1) :747-&
[10]  
Eswaran SK, 2006, J BONE MINER RES, V21, P307, DOI 10.1359/JBMR.051027