Fault Analysis of Journal Bearing Considering the Turbulent and Thermo-Hydrodynamic Effects

被引:0
|
作者
Xu, Guohui [1 ]
Zhou, Jian [2 ]
Geng, Haipeng [1 ]
Lu, Mingjian [1 ]
机构
[1] Xi An Jiao Tong Univ, State Key Lab Strength & Vibrat Mech Struct, Xian 710049, Peoples R China
[2] Xi An Jiao Tong Univ, Sch Mech Engn, Inst Mech & Informat Syst, Xian 710049, Peoples R China
基金
中国国家自然科学基金;
关键词
journal bearing; turbulence; thermo-hydrodynamic effect; wear; WEAR;
D O I
10.4028/www.scientific.net/AMM.670-671.638
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In order to investigate the cause of the typical bush rupture and wear damages in the journal bearing of the steam turbine generator set, the lubrication turbulence and thermo-hydrodynamic effects were studied. The generalized Reynolds equation, energy equation and heat conduction equations were solved with the finite difference method, and the pressure, temperature, thickness distribution of the oil film were obtained. Analysis results can be well explains the bearing bush burst in bearings maximum pressure place because of heavy load running. The bearing bush burst made friction intensified that caused oil temperature increasing and the viscosity reduce, which led to the rotor eccentricity increase, the minimum film thickness smaller and bearing static working point down, thus causing the wear damages until shutdown.
引用
收藏
页码:638 / 645
页数:8
相关论文
共 50 条
  • [11] Thermo-hydrodynamic lubrication analysis of internal combustion engine's main bearing considering thermal deformation effects
    Tong, Baohong
    Gui, Changlin
    Sun, Jun
    Zhao, Xiaoyong
    Chen, Hua
    Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 2007, 43 (06): : 180 - 185
  • [12] Thermo-Hydrodynamic Analysis on Temperature Profile of Circular Journal Bearing using Computational Fluid Dynamics
    Singla, Amit
    Singh, Paramjit
    Kumar, Abhay
    Chauhan, Amit
    Bala, Saroj
    2014 RECENT ADVANCES IN ENGINEERING AND COMPUTATIONAL SCIENCES (RAECS), 2014,
  • [13] Thermo-Hydrodynamic Analysis of a Plain Journal Bearing on the Basis of a New Mass Conserving Cavitation Algorithm
    Alakhramsing, Shivam
    van Ostayen, Ron
    Eling, Rob
    LUBRICANTS, 2015, 3 (02): : 256 - 280
  • [14] Thermo-hydrodynamic lubrication model of journal bearings
    Tanaka, M
    Hatakenaka, K
    JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, 2004, 49 (09) : 714 - 719
  • [15] A comparative study on turbulent models for three-dimensional thermo-hydrodynamic analysis of textured thrust bearing
    Tauviqirrahman, Mohammad
    Lim, Youngbin
    Jamari, Jamari
    Muchammad, Muchammad
    Pugastri, Ben Oni
    Yohana, Eflita
    Ammarullah, Muhammad Imam
    COGENT ENGINEERING, 2024, 11 (01):
  • [16] Steady-state thermo-hydrodynamic analysis of cylindrical fluid film journal bearing with an axial groove
    Singh, U.
    Roy, L.
    Sahu, M.
    TRIBOLOGY INTERNATIONAL, 2008, 41 (12) : 1135 - 1144
  • [17] Thermo-hydrodynamic analysis of large-eccentricity hydrodynamic bearings with texture on journal surface
    Wang, Lin
    Han, Zhanhai
    Chen, Guoding
    Su, Hua
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2018, 232 (19) : 3564 - 3569
  • [18] The effect of liner surface texture on journal bearing performance under thermo-hydrodynamic conditions
    Saleh, Ahmed M.
    Crosby, Wael
    El Fahham, Ibrahim M.
    Elhadary, M.
    INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2020, 72 (03) : 405 - 414
  • [19] Mixed Thermo-hydrodynamic Analysis of Journal Bearings with Couple Stress Lubricants
    Zheng, Liangyan
    Zhu, Hanhua
    Fan, Shidong
    Xiong, Ting
    Ma, Jingning
    Wu, Jie
    Jiang, Pan
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2023, 59 (10): : 290 - 300
  • [20] Thermo-Hydrodynamic Lubrication Analysis of Slipper Pair Considering Wear Profile
    Mo, Hu
    Hu, Yanping
    Quan, Song
    LUBRICANTS, 2023, 11 (05)