Incomplete transformation of upper bainite in Nb bearing low carbon steels

被引：33

作者：

Furuhara, T. ^{[1
]}

Yamaguchi, T. ^{[2
]}

Miyamoto, G. ^{[1
]}

Maki, T. ^{[3
]}

机构：

[1] Tohoku Univ, Inst Mat Res, Aoba Ku, Sendai, Miyagi 9808577, Japan

[2] Technol Res Inst Osaka Prefecture, Izumi 5941157, Japan

[3] Nippon Steel Corp Ltd, Futtsu 2938511, Japan

来源：

MATERIALS SCIENCE AND TECHNOLOGY | 2010年 / 26卷 / 04期

关键词：

Steel; Phase transformation; Bainite; Ferrite; Cementite; Pearlite; Microalloying; ALLOYING ELEMENTS; MN STEELS; FE-C; FERRITE; NIOBIUM; NUCLEATION; MECHANISM; KINETICS; HAZ;

D O I：

10.1179/026708309X12512744

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Kinetics and microstructure of bainite transformation in Fe-(0.15 or 0.05)C-0.2Si-1.5Mn (mass%) alloys with Nb addition of 0.03 mass%. Bainite transformation occurs at temperatures below 873 K. At 853 K, transformation rapidly proceeds by formation of bainitic ferrite without carbide precipitation, but transformation stasis appears for a certain period in the Nb added alloys leaving untransformed austenite film between neighbouring bainitic ferrites. On the other band, the Nb free alloys do not show such a stasis until the transformation is completed. By further holding, the transformation in the Nb added alloy restarts by forming the mixture of dislocation free ferrite with cementite precipitation in the austenite films. In contrast, bainite transformation accompanying cementite precipitation occurs in both Nb free and Nb added alloys at 773 K, resulting in no difference in transformation kinetics. It is proposed that the incomplete transformation is caused by suppression of ferrite nucleation at interphase boundaries between pre-existing bainitic ferrite and austenite due to Nb segregation.

引用

页码：392 / 397

页数：6

共 30 条

[21]

OHMORI Y, 1971, T IRON STEEL I JPN, V11, P250

[22] Nb(C,N) precipitation kinetics in the bainite region of a low-carbon Nb-microalloyed steel [J].

Park, J. S. ;

Lee, Y. K. .

SCRIPTA MATERIALIA, 2007, 57 (02) :109-112

[23] THE INCOMPLETE TRANSFORMATION PHENOMENON IN FE-C-MO ALLOYS [J].

REYNOLDS, WT ;

LI, FZ ;

SHUI, CK ;

AARONSON, HI .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1990, 21 (06) :1433-1463

[24] INTERFACIAL STRUCTURE OF THE BROAD FACES OF FERRITE PLATES [J].

RIGSBEE, JM ;

AARONSON, HI .

ACTA METALLURGICA, 1979, 27 (03) :365-376

[25] Effect of niobium on massive transformation in ultra low carbon steels: A solute drag treatment [J].

Suehiro, M ;

Liu, ZK ;

Agren, J .

ACTA MATERIALIA, 1996, 44 (10) :4241-4251

[26]

Takahashi K, 2007, UNPUB

[27] CONTINUOUS COOLING TRANSFORMATIONS AND MICROSTRUCTURES IN A LOW-CARBON, HIGH-STRENGTH LOW-ALLOY PLATE STEEL [J].

THOMPSON, SW ;

COLVIN, DJ ;

KRAUSS, G .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1990, 21 (06) :1493-1507

[28] FORMATION MECHANISM OF BAINITIC FERRITE IN AN FE-2PCT SI-0.6PCT C ALLOY [J].

TSUZAKI, K ;

KODAI, A ;

MAKI, T .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1994, 25 (09) :2009-2016

[29] THE EFFECT OF ALLOYING ELEMENTS ON THE STRUCTURE AND MECHANICAL-PROPERTIES OF ULTRA-LOW CARBON BAINITIC STEELS [J].

WANG, SC ;

KAO, PW .

JOURNAL OF MATERIALS SCIENCE, 1993, 28 (19) :5169-5175

[30] EFFECTS OF CHEMICAL-COMPOSITION, ROLLING AND COOLING CONDITIONS ON THE AMOUNT OF MARTENSITE AUSTENITE (M/A) CONSTITUENT FORMATION IN LOW-CARBON BAINITIC STEELS [J].

WANG, SC ;

YANG, JR .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1992, 154 (01) :43-49

← 1 2 3 →