HIGH-TEMPERATURE CHARACTERISTICS OF PLASTICITY OF Mg-Y-RE-Zr ALLOY

被引：0
|
作者：
Kuc, Dariusz [1 ]
Hadasik, Eugeniusz [1 ]
Schindler, Ivo [1 ]
Mrugala, Agata [1 ]
机构：
[1] Silesian Tech Univ, Katowice, Poland
来源：
METAL 2015: 24TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS | 2015年
关键词：
Magnesium alloy; tests of plasticity; microstructure; mechanical properties; cracking; MAGNESIUM; MODEL; AZ31;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper presents analysis of plasticity characteristics and microstructure of magnesium alloy type WE43 with yttrium, zirconium and rare earth elements. Susceptibility of magnesium alloy to cracking in high temperatures was tested on Gleeble3800 simulator. Zero resistance temperature and zero plasticity were determined. Tests were conducted for assessment of susceptibility of tested alloys to hot plastic deformation. A tensile test was performed in temperature range from 250 to 450 degrees C. On the basis of the results, ultimate tensile strength and reduction of area were determined for tested samples. A varied plasticity of tested alloys was found depending on aluminium content. Tests results will be useful in development of forging technology for chosen construction elements which serve as light substitutes of currently used materials.
引用
收藏
页码：351 / 357
页数：7
相关论文
共 50 条
  • [1] An investigation into wire arc additive manufacturing of Mg-Y-RE-Zr alloy
    Wang, Qiman
    Wu, Guohua
    Tong, Xin
    MATERIALS LETTERS, 2022, 326
  • [2] The Influence of the Deformation Method on the Microstructure and Properties of Magnesium Alloy Mg-Y-RE-Zr
    Bednarczyk, Iwona
    Kuc, Dariusz
    MATERIALS, 2022, 15 (06)
  • [3] Microstructure and mechanical properties of equal channel angular pressed Mg-Y-RE-Zr alloy
    Zhou, L.
    Liu, Y.
    Zhang, J.
    Kang, Z.
    MATERIALS SCIENCE AND TECHNOLOGY, 2016, 32 (10) : 969 - 975
  • [4] HIGH-TEMPERATURE CHARACTERISTICS OF PLASTICITY OF MAGNESIUM ALLOYS
    Hadasik, Eugeniusz
    Kuc, Dariusz
    METAL 2014: 23RD INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2014, : 291 - 296
  • [5] Effect of Gd content on microstructure and mechanical properties of Mg-Y-RE-Zr alloys
    Zhang Kui
    Li Xing-gang
    Li Yong-jun
    Ma Ming-long
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2008, 18 : S12 - S16
  • [6] Effect of Gd content on microstructure and mechanical properties of Mg-Y-RE-Zr alloys
    张奎
    李兴刚
    李永军
    马鸣龙
    Transactions of Nonferrous Metals Society of China, 2008, 18(S1) (S1) : 12 - 16
  • [7] The relation between microstructure and corrosion behavior of Mg-Y-RE-Zr alloys
    Ben-Hamu, G.
    Eliezer, D.
    Shin, K. S.
    Cohen, S.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 431 (1-2) : 269 - 276
  • [8] Effect of Nd on Microstructure and High-Temperature Mechanical Properties of As-cast Mg-Y-Nd-Zn-Zr Alloy
    Wang, Tao
    Fu, Yuanke
    Wang, Haojie
    Feng, Yicheng
    Guo, Erjun
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2024, 77 (09) : 2857 - 2866
  • [9] Microstructural evolution and strengthening mechanism of Mg-Y-RE-Zr alloy fabricated by quasi-directed energy deposition
    Tong, Xin
    Wu, Guohua
    Easton, Mark A.
    Sun, Ming
    Wang, Qiman
    Zhang, Liang
    ADDITIVE MANUFACTURING, 2023, 67
  • [10] Microstructure and properties of low-frequency pulsed arc deposition of Mg-Y-RE-Zr alloy under T6 heat treatment
    Lin, Jiaxin
    Dai, Hongbin
    Chen, Hongtao
    Miao, Jian
    MATERIALS LETTERS, 2024, 358
12345