Co-Production of Hydrogen and Methanol Using Fuel Mix Systems: Technical and Economic Assessment

被引:13
作者
Ahmed, Usama [1 ,2 ]
Zahid, Umer [1 ,3 ]
Onaizi, Sagheer A. [1 ,2 ]
Jameel, Abdul Gani Abdul [1 ,4 ]
Ahmad, Nauman [5 ,6 ]
Ahmad, Nabeel [7 ]
AlMohamadi, Hamad [8 ]
机构
[1] King Fahd Univ Petr & Minerals, Chem Engn Dept, Dhahran 31261, Saudi Arabia
[2] King Fahd Univ Petr & Minerals, Interdisciplinary Res Ctr Hydrogen & Energy Stora, Dhahran 31261, Saudi Arabia
[3] King Fahd Univ Petr & Minerals, Interdisciplinary Res Ctr Membranes & Water Secur, Dhahran 31261, Saudi Arabia
[4] King Fahd Univ Petr & Minerals, Ctr Refining & Adv Chem, Dhahran 31261, Saudi Arabia
[5] Monash Univ, Dept Chem Engn, Clayton, Vic 3800, Australia
[6] Univ Punjab, Inst Chem Engn & Technol, Lahore 53700, Pakistan
[7] COMSATS Univ Islamabad, Dept Chem Engn, Lahore 54000, Pakistan
[8] Islamic Univ Madinah, Fac Engn, Dept Chem Engn, Madinah 42351, Saudi Arabia
来源
APPLIED SCIENCES-BASEL | 2021年 / 11卷 / 14期
关键词
gasification; reforming; methanol; hydrogen; carbon capture; process integration; TECHNOECONOMIC ANALYSIS; ENERGY; POLYGENERATION; INTEGRATION; GENERATION; POWER;
D O I
10.3390/app11146577
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
With the increase in global energy requirements, the utilization of fossil fuels has also increased, which has caused global warming. In this study, a process integration framework based on an energy mix system is proposed to simultaneously produce two cleaner fuels (methanol and H-2). Aspen Plus is used to develop process models followed by their techno-economic assessment. Case 1 is considered the base case process, where the coal-biomass gasification process is used to produce the synthesis gas, which is further converted into H-2 and methanol. Conversely, the case 2 design represents the novel process configuration framework, where the coal-biomass gasification technology in case 1 is sequentially integrated with the methane reforming technology to minimize the energy penalties while increasing the net fuel production. To perform the technical analysis, the fuel production rates, carbon conversion efficiencies and specific energy requirements are compared for both models. It is analyzed from the results that the case 2 design offers higher methanol and H-2 production rates with lower energy requirements. Additionally, the specific energy requirement for case 2 is 29% lower compared to the case 1 design, leading to an increase in the process efficiency of case 2 by 3.5%.
引用
收藏
页数:12
相关论文
共 22 条
[3]   Process simulation and integration of IGCC systems for H2/syngas/electricity generation with control on CO2 emissions [J].
Ahmed, Usama ;
Zahid, Umer ;
Lee, Younggeun .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2019, 44 (14) :7137-7148
[4]   A techno-economic-environmental study evaluating the potential of oxygen-steam biomass gasification for the generation of value-added products [J].
AlNouss, Ahmed ;
McKay, Gordon ;
Al-Ansari, Tareq .
ENERGY CONVERSION AND MANAGEMENT, 2019, 196 :664-676
[5]  
Bazzanella A.M., 2017, DECHEMA GES CHEM TEC
[6]   On the economics of methanol production from natural gas [J].
Blumberg, Timo ;
Tsatsaronis, George ;
Morosuk, Tatiana .
FUEL, 2019, 256
[7]   Flue gas treatment by power-to-gas integration for methane and ammonia synthesis - Energy and environmental analysis [J].
Castellani, Beatrice ;
Rinaldi, Sara ;
Morini, Elena ;
Nastasi, Benedetto ;
Rossi, Federico .
ENERGY CONVERSION AND MANAGEMENT, 2018, 171 :626-634
[8]   Experimental Investigation on CO2 Methanation Process for Solar Energy Storage Compared to CO2-Based Methanol Synthesis [J].
Castellani, Beatrice ;
Gambelli, Alberto Maria ;
Morini, Elena ;
Nastasi, Benedetto ;
Presciutti, Andrea ;
Filipponi, Mirko ;
Nicolini, Andrea ;
Rossi, Federico .
ENERGIES, 2017, 10 (07)
[9]  
Edenhofer O., 2015, CLIMATE CHANGE 2014, V3
[10]  
Field CB, 2014, CLIMATE CHANGE 2014: IMPACTS, ADAPTATION, AND VULNERABILITY, PT A: GLOBAL AND SECTORAL ASPECTS, P1