Physico-Mechanical and Tribological Properties of Grewia Optiva Fiber/Bio-Particulates Hybrid Polymer Composites

被引:15
|
作者
Kumar, Sandeep [1 ]
Gangil, Brijesh [1 ]
Patel, Vinay Kumar [2 ]
机构
[1] HNB Garhwal Univ, SOET, Dept Mech Engn, Srinagar, Uttarakhand, India
[2] GB Pant Engn Coll, Dept Mech Engn, Pauri Garhwal, India
来源
INTERNATIONAL CONFERENCE ON CONDENSED MATTER AND APPLIED PHYSICS (ICC 2015) | 2016年 / 1728卷
关键词
WEAR BEHAVIOR;
D O I
10.1063/1.4946435
中图分类号
O59 [应用物理学];
学科分类号
摘要
Lack of resources and increasing environmental issues has received widespread attention for the development of natural fiber/particulate reinforced hybrid polymer composites. In the present investigation the authors use (GO) Grewia Optiva as the main reinforcement and rice husk/wheat straw as additional particulates for improving the mechanical and wear properties of polymer composites. The samples were prepared by hand layup technique according to ASTM standards. The results indicated that incorporation of wheat straw with GO polymer materials exhibited better hardness (2.5 times harder) and less wear (0.85 times) than mono GO fiber polymer composites (GOFRP). Moreover, Rice husk filled GOFRP shows superior impact energy among the all set of composites. Water absorption behavior was also discussed in this investigation.
引用
收藏
页数:5
相关论文
共 35 条
  • [21] A study on: Impact on novel clay dispersion on mechanical, thermal and vibration properties of glass fiber-reinforced interpenetrating polymer networks (IPNs) hybrid composites
    Kumar, M. Naveen
    Kumar, K. R. Vijaya
    Suresh, G.
    Muthukaruppan, Meenakshi Chinnathambi
    Vezhavendhan, R.
    Chandramohan, P.
    Rathinasabapathi, G.
    POLYMER COMPOSITES, 2024, 45 (18) : 16882 - 16897
  • [22] Characterization of mechanical and tribological properties of graphite and alumina reinforced zinc alloy (ZA-27) hybrid metal matrix composites
    Gangwar, Swati
    Payak, Viresh
    Pathak, Vimal Kumar
    Jamwal, Anbesh
    Gupta, Pallav
    JOURNAL OF COMPOSITE MATERIALS, 2020, 54 (30) : 4889 - 4901
  • [23] Mechanical and Tribological Properties of AA6061/SiC/Aloe Vera Powder Hybrid Al Composites Fabricated by Stir Casting
    Yuvaraj, N.
    Koli, Yashwant
    Vedabouriswaran, G.
    Issar, Plash
    SILICON, 2023, 15 (05) : 2451 - 2465
  • [24] Mechanical and tribological properties of Self-Lubricating Al 6061 hybrid nano metal matrix composites reinforced by nSiC and MWCNTs
    Sivamaran, V.
    Balasubramanian, V.
    Gopalakrishnan, M.
    Viswabaskaran, V.
    Rao, A. Gourav
    Sivakumar, G.
    SURFACES AND INTERFACES, 2020, 21
  • [25] Impact of Carbon Fiber Reinforcement on Mechanical and Tribological Behavior of 3D-Printed Polyethylene Terephthalate Glycol Polymer Composites-An Experimental Investigation
    Kichloo, Aysha Farzana
    Raina, Ankush
    Ul Haq, Mir Irfan
    Wani, Mohd Shaharyar
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (02) : 1021 - 1038
  • [26] An inclusive study on hygrothermal aging effects on tribological and physical properties of E-glass fiber reinforced interpenetrating polymer networks (IPNs) composites
    Kumar, M. Naveen
    Kumar, K. R. Vijaya
    Suresh, G.
    Muthukaruppan, Meenakshi Chinnathambi
    Vezhavendhan, R.
    Chandramohan, P.
    Rathinasabapathi, G.
    POLYMER COMPOSITES, 2025,
  • [27] Effect of heat treatment on microstructure, mechanical and tribological properties of Al-based TiB2/ZrO2 reinforced hybrid composites
    Singh, Pushpraj
    Das, Anil Kumar
    Singh, Raj Kumar
    MULTISCALE AND MULTIDISCIPLINARY MODELING EXPERIMENTS AND DESIGN, 2025, 8 (01)
  • [28] Improvement of mechanical and wear properties of epoxy/glass fiber/Titanium Carbide plus Titanium diborides hybrid composites by adding clay nanoparticles
    Shahrajabian, Hamzeh
    Hatami, Hasan
    Rafiei, Mahdi
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2025, 44 (1-2) : 73 - 84
  • [29] Comparative assessment of the mechanical, tribological, and corrosion properties of Al/SiC/Al2O3 and Al/SiC/TiO2 hybrid composites
    Perumal, G.
    Senthilkumar, N.
    Naik, Nithesh
    Deepanraj, B.
    DISCOVER APPLIED SCIENCES, 2025, 7 (04)
  • [30] Influence of quarry dust-silicon carbide weight percentage on the mechanical properties and tribological behavior of stir cast ZA-27 alloy based hybrid composites
    Folorunso D.O.
    Owoeye S.S.
    Journal of King Saud University - Engineering Sciences, 2019, 31 (03): : 280 - 285