Microstructure and mechanical properties of fibre laser welded medium manganese TRIP steel

被引：80
作者：
Lun, N. [1 ]
Saha, D. C. [1 ]
Macwan, A. [1 ]
Pan, H. [2 ]
Wang, L. [3 ]
Goodwin, F. [4 ]
Zhou, Y. [1 ]
机构：
[1] Univ Waterloo, Dept Mech & Mechatron Engn, 200 Univ Avenue West, Waterloo, ON N2L 3G1, Canada
[2] State Key Lab Dev Applicat Technol Automot Steels, Shanghai 201900, Peoples R China
[3] Baosteel Res & Dev Technol Ctr, Shanghai 201900, Peoples R China
[4] Int Zinc Assoc, Durham, NC 27713 USA
来源：
MATERIALS & DESIGN | 2017年 / 131卷
基金：
加拿大自然科学与工程研究理事会;
关键词：
Fibre laser welds; Medium manganese TRIP steel; Microstructure; Microhardness; Tensile testing; Formability; TWIP STEEL; DUAL-PHASE; TENSILE PROPERTIES; FUSION ZONE; AUSTENITE; MARTENSITE; ALLOY; DEFORMATION; STABILITY; JOINTS;
D O I：
10.1016/j.matdes.2017.06.037
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Fibre laser welds of Fe-0.15C-10Mn-1.5Al medium-Mn transformation induced plasticity (TRIP) steel and its dissimilar combination with high strength low alloy (HSLA) and dual-phase (DP980) steel was assessed with respect to microstructure, microhardness, formability, and tensile properties. The fusion zone (FZ) of the medium-Mn TRIP steel weldment was consist of predominantly martensite with some interdendritic austenite due to high manganese concentration which stabilizes austenite. The FZ of dissimilar combinations to HSLA and DP980 steel consisted of mostly martensite. Microhardness profiles of the medium-Mn TRIP steel showed no indications of detrimental heat-affected zone (HAZ) softening despite the high base metal (BM) hardness (396 HV). Laser welds containing medium-Mn TRIP displayed similar FZ hardness values (413-438 HV). Failure of medium-Mn TRIP laser welds under uniaxial tension occurred adjacent to the FZ where localized strain accumulated. The tensile results showed consistent failure in the weaker BM of dissimilar joints at high joint efficiency (95-100%) with respect to the weaker material of the joint. Biaxial stretch formability of TRIP-TRIP similar welds was determined to be severely limited by the brittle FZ. Strain accumulation in the BM of HSLA and DP980 steel in dissimilar combinations improved formability of laser welded blanks containing medium-Mn TRIP steel. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码：450 / 459
页数：10
相关论文
共 38 条
[1]   Development of 3rd generation AHSS with medium Mn content alloying compositions [J].
Aydin, Huseyin ;
Essadiqi, Elhachmi ;
Jung, In-Ho ;
Yue, Stephen .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 564 :501-508
[2]   Tempering of Martensite in Dual-Phase Steels and Its Effects on Softening Behavior [J].
Baltazar Hernandez, V. H. ;
Nayak, S. S. ;
Zhou, Y. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2011, 42A (10) :3115-3129
[3]   Microstructures and mechanical properties of the third generation automobile steels fabricated by ART-annealing [J].
Cao WenQuan ;
Wang Chang ;
Wang CunYu ;
Shi Jie ;
Wang MaoQiu ;
Dong Han ;
Weng YuQing .
SCIENCE CHINA-TECHNOLOGICAL SCIENCES, 2012, 55 (07) :1814-1822
[4]   Some Aspects of High Manganese Twinning-Induced Plasticity (TWIP) Steel, A Review [J].
Chen, Liqing ;
Zhao, Yang ;
Qin, Xiaomei .
ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2013, 26 (01) :1-15
[5]  
De Cooman BC, 2011, NEW TRENDS AND DEVELOPMENTS IN AUTOMOTIVE SYSTEM ENGINEERING, P101
[6]   State-of-the-knowledge on TWIP steel [J].
De Cooman, B. C. ;
Kwon, O. ;
Chin, K. -G. .
MATERIALS SCIENCE AND TECHNOLOGY, 2012, 28 (05) :513-527
[7]   Austenite stabilization through manganese enrichment [J].
De Moor, Emmanuel ;
Matlock, David K. ;
Speer, John G. ;
Merwin, Matthew J. .
SCRIPTA MATERIALIA, 2011, 64 (02) :185-188
[8]   The size effect of initial martensite constituents on the microstructure and tensile properties of intercritically annealed Fe-9Mn-0.05C steel [J].
Han, Jeongho ;
Lee, Seung-Joon ;
Lee, Chan-Young ;
Lee, Sukjin ;
Jo, Seo Yeon ;
Lee, Young-Kook .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 633 :9-16
[9]  
Kim C., 2011, Procedia Eng, P2226, DOI [10.1016/j.proeng.2011.04.368, DOI 10.1016/J.PROENG.2011.04.368]
[10]   Fe-Al-Mn-C lightweight structural alloys: a review on the microstructures and mechanical properties [J].
Kim, Hansoo ;
Suh, Dong-Woo ;
Kim, Nack J. .
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2013, 14 (01)
1234