MNet-DACS: Multi-level network data acquisition and control system

This paper describes the implementation of a distributed data acquisition network based on the 80C592 microcontroller from Intel. Each Station is connected in a hierarchical way to form a tree topology. The lower level network stations, designated by Slaves, are dedicate to the data acquisition and the generation of control signals. The upper level, Masters, are responsible for the communications control. Both networks uses a CAN - Controller Area Network - Bus, for Data Transferring, and the global Network is also connected to a PC, via CAN. A device router, NetManager, was implemented to support total intrinsic requirements at the communication level. This type of connection allows total configuration from a personal computer, PC, in which runs a software application developed for Windows(TM) environments. The tests performed at the laboratory, with transmission rates varying from 40Kbits/s to 1Mbits/s, showed that the communications were performed without errors for cable lengths of 1100m to 40m, respectively. This system is now being installed in a set of environmental chambers and greenhouses located on UTAD, where it will be monitored and controlled the air temperatures and humidities, the CO2 and ammonia concentrations and the radiation level.