Deep-Subwavelength 2D Periodic Surface Nanostructures on Diamond by Double-Pulse Femtosecond Laser Irradiation

被引:67
|
作者
Mastellone, Matteo [1 ]
Bellucci, Alessandro [1 ]
Girolami, Marco [1 ]
Serpente, Valerio [1 ]
Polini, Riccardo [1 ,2 ]
Orlando, Stefano [3 ]
Santagata, Antonio [3 ]
Sani, Elisa [4 ]
Hitzel, Frank [5 ]
Trucchi, Daniele M. [1 ]
机构
[1] CNR, Ist Struttura Mat ISM, DiaTHEMA Lab, Sede Secondaria Montelibretti, I-00015 Rome, Italy
[2] Univ Roma Tor Vergata, Dipartimento Sci & Tecnol Chim, I-00133 Rome, Italy
[3] CNR, Ist Struttura Mat ISM, Sede Secondaria Tito Scalo, Area Ind Contrada S Loia, I-85050 Potenza, Italy
[4] CNR, Ist Nazl Ott INO, I-50125 Florence, Italy
[5] Semilab Germany GmbH, D-38106 Braunschweig, Germany
关键词
diamond; laser; surface texturing; LIPSSs; metasurface; STAINLESS-STEEL; NANOPARTICLES; POLARIZATION; RIPPLES; SILICON; ARRAYS; BEAM; SPOT;
D O I
10.1021/acs.nanolett.1c01310
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Two-dimensional laser-induced periodic surface structures with a deep-subwavelength periodicity (80 nm approximate to lambda/10) are obtained for the first time on diamond surfaces. The distinctive surface nanotexturing is achieved by employing a single step technique that relies on irradiation with two temporally delayed and cross-polarized femtosecond-laser pulses (100 fs duration, 800 nm wavelength, 1 kHz repetition rate) generated with a Michelson-like interferometer configuration, followed by chemical etching of surface debris. In this Letter, we demonstrate that, if the delay between two consecutive pulses is <= 2 ps, the 2D periodicity of nanostructures can be tuned by controlling the number of pulses irradiating the surface. Under scanning mode, the method is effective in treating uniformly large areas of diamond, so to induce remarkable antireflection properties able to enhance the absorptance in the visible up to 50 times and to pave the route toward the creation of metasurfaces for future diamond-based optoelectronic devices.
引用
收藏
页码:4477 / 4483
页数:7
相关论文
共 25 条
  • [21] Implications of transient changes of optical and surface properties of solids during femtosecond laser pulse irradiation to the formation of laser-induced periodic surface structures
    Bonse, J.
    Rosenfeld, A.
    Krueger, J.
    APPLIED SURFACE SCIENCE, 2011, 257 (12) : 5420 - 5423
  • [22] Double-pulse femtosecond laser peening of aluminum alloy AA5038: Effect of inter-pulse delay on transient optical plume emission and final surface micro-hardness
    Ageev, E. I.
    Bychenkov, V. Yu.
    Ionin, A. A.
    Kudryashov, S. I.
    Petrov, A. A.
    Samokhvalov, A. A.
    Veiko, V. P.
    APPLIED PHYSICS LETTERS, 2016, 109 (21)
  • [23] Orthogonally superimposed laser-induced periodic surface structures (LIPSS) upon nanosecond laser pulse irradiation of SiO2/Si layered systems
    Nuernberger, Philipp
    Reinhardt, Hendrik M.
    Kim, Hee-Cheol
    Pfeifer, Erik
    Kroll, Moritz
    Muelller, Sandra
    Yang, Fang
    Hampp, Norbert A.
    APPLIED SURFACE SCIENCE, 2017, 425 : 682 - 688
  • [24] Laser-induced periodic surface structures on fused silica upon cross-polarized two-color double-fs-pulse irradiation
    Hoehm, S.
    Herzlieb, M.
    Rosenfeld, A.
    Krueger, J.
    Bonse, J.
    APPLIED SURFACE SCIENCE, 2015, 336 : 39 - 42
  • [25] Laser etching of periodic 1D-and 2D submicron relief gratings on pre-structured fused silica surface
    Boehme, Rico
    Zimmer, Klaus
    PHOTONIC CRYSTAL MATERIALS AND DEVICES III (I.E. V), 2006, 6182