Sorption of arsenic, cadmium, and lead by chars produced from fast pyrolysis of wood and bark during bio-oil production

被引:783
|
作者
Mohan, Dinesh [1 ]
Pittman, Charles U., Jr.
Bricka, Mark
Smith, Fran
Yancey, Ben
Mohammad, Javeed
Steele, Philip H.
Alexandre-Franco, Maria F.
Gomez-Serrano, Vicente
Gong, Henry
机构
[1] Mississippi State Univ, Dept Chem, Mississippi State, MS 39761 USA
[2] Mississippi State Univ, David C Swalm Sch Chem Engn, Mississippi State, MS 39761 USA
[3] Washington & Jefferson Coll, Dept Chem, Washington, PA 15301 USA
[4] Univ Mississippi, Dept Chem, University, MS 38677 USA
[5] Mississippi State Univ, Dept Forest Prod, Mississippi State, MS 39762 USA
[6] Univ Extremadura, Dept Quim Inorgan, E-06071 Badajoz, Spain
[7] Penn State Univ, Mat Res Inst, University Pk, PA 16802 USA
[8] Ind Toxicol Res Ctr, Environm Chem Div, Lucknow 226001, Uttar Pradesh, India
基金
美国国家科学基金会;
关键词
bio-oil char; activated carbon; arsenic; cadmium; lead; adsorption; metals removal; bio-oils; bio chars; water treatment;
D O I
10.1016/j.jcis.2007.01.020
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Bio-char by-products from fast wood/bark pyrolyses, were investigated as adsorbents for the removal of the toxic metals (As3+, Cd2+, Pb2+) from water. Oak bark, pine bark, oak wood, and pine wood chars were obtained from fast pyrolysis at 400 and 450 degrees C in an auger-fed reactor and characterized. A commercial activated carbon was also investigated for comparison. Chars were sieved (>600, 600-250, 250-177, 177-149, and < 149 mu m) and the particle size fraction from 600 to 250 mu m was used without further modification for all studies unless otherwise stated. Sorption studies were performed at different temperatures, pHs, and solid to liquid ratios in the batch mode. Maximum adsorption occurred over a pH range 3-4 for arsenic and 4-5 for lead and cadmium. Kinetic studies yielded an optimum equilibrium time of 24 h with an adsorbent dose of 10 g/L and concentration similar to 100 mg/L for lead and cadmium. Sorption isotherms studies were conducted in broad concentration ranges (1-1000 ppb for arsenic, 1 x 10(-5)-5 x 10(-3) M for lead and cadmium). Oak bark out-performed the other chars and nearly mimicked Calgon F-400 adsorption for lead and cadmium. In an aqueous lead solution with initial concentration of 4.8 x 10(-4) M, both oak bark and Calgon F-400 (10 g/L) removed nearly 100% of the heavy metal. Oak bark (10 g/L) also removed about 70% of arsenic and 50% of cadmium from aqueous solutions. Varying temperatures (e.g., 5, 25, and 40 degrees C) were used to determine the effect of temperatures. The equilibrium data were modeled with the help of Langmuir and Freundlich equations. Overall, the data are well fitted with both the models, with a slight advantage for Langmuir model. The oak bark char's ability to remove Pb(II) and Cd(II) is remarkable when considered in terms of the amount of metal adsorbed per unit surface area (0.5 157 mg/m(2) for Pb(II) and 0.213 mg/m(2) for Cd(II) versus that of commercial activated carbon. (c) 2007 Elsevier Inc. All rights reserved.
引用
收藏
页码:57 / 73
页数:17
相关论文
共 50 条
  • [11] Bio-oil production from fast pyrolysis of furniture processing residue
    Hoang Vu Ly
    Quoc Khanh Tran
    Byung Hee Chun
    Changho Oh
    Jinsoo Kim
    Seung-Soo Kim
    Korean Journal of Chemical Engineering, 2021, 38 : 306 - 315
  • [12] Characterization of Pyrolytic Sugars in Bio-Oil Produced from Biomass Fast Pyrolysis
    Yu, Yun
    Chua, Yee Wen
    Wu, Hongwei
    ENERGY & FUELS, 2016, 30 (05) : 4145 - 4149
  • [13] Bio-oil from Pyrolysis of Black Alder Wood
    Balat, M.
    Demirbas, M. F.
    ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2009, 31 (19) : 1719 - 1727
  • [14] Bio-oil production from pyrolysis of black locust (Robinia pseudoacacia) wood
    Balat, Mehmet
    ENERGY EXPLORATION & EXPLOITATION, 2010, 28 (03) : 173 - 186
  • [15] FAST PYROLYSIS - EFFECT OF WOOD DRYING ON THE YIELD AND PROPERTIES OF BIO-OIL
    Dobele, Galina
    Urbanovich, Igors
    Volpert, Aleksandr
    Kampars, Valdis
    Samulis, Eriks
    BIORESOURCES, 2007, 2 (04): : 699 - 706
  • [16] Effect of hydrothermal pretreatment on properties of bio-oil produced from fast pyrolysis of eucalyptus wood in a fluidized bed reactor
    Chang, Sheng
    Zhao, Zengli
    Zheng, Anqing
    Li, Xiaoming
    Wang, Xiaobo
    Huang, Zhen
    He, Fang
    Li, Haibin
    BIORESOURCE TECHNOLOGY, 2013, 138 : 321 - 328
  • [17] Quality Control in Fast Pyrolysis Bio-Oil Production and Use
    Oasmaa, A.
    Elliott, D. C.
    Mueller, S.
    ENVIRONMENTAL PROGRESS & SUSTAINABLE ENERGY, 2009, 28 (03) : 404 - 409
  • [18] Exergetic analysis of a fast pyrolysis process for bio-oil production
    Peters, Jens F.
    Petrakopoulou, Fontina
    Dufour, Javier
    FUEL PROCESSING TECHNOLOGY, 2014, 119 : 245 - 255
  • [19] Characterization of the viscosity of bio-oil produced by fast pyrolysis of the wheat straw
    Younis, Muhammad Rizwan
    Farooq, Muhammad
    Imran, Muhammad
    Kazim, Ali Hussain
    Shabbir, Aqsa
    ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS, 2021, 43 (15) : 1853 - 1868
  • [20] Catalytic fast pyrolysis of rice husk for bio-oil production
    Cai, Wenfei
    Dai, Li
    Liu, Ronghou
    ENERGY, 2018, 154 : 477 - 487