Sorption of arsenic, cadmium, and lead by chars produced from fast pyrolysis of wood and bark during bio-oil production

被引:783
|
作者
Mohan, Dinesh [1 ]
Pittman, Charles U., Jr.
Bricka, Mark
Smith, Fran
Yancey, Ben
Mohammad, Javeed
Steele, Philip H.
Alexandre-Franco, Maria F.
Gomez-Serrano, Vicente
Gong, Henry
机构
[1] Mississippi State Univ, Dept Chem, Mississippi State, MS 39761 USA
[2] Mississippi State Univ, David C Swalm Sch Chem Engn, Mississippi State, MS 39761 USA
[3] Washington & Jefferson Coll, Dept Chem, Washington, PA 15301 USA
[4] Univ Mississippi, Dept Chem, University, MS 38677 USA
[5] Mississippi State Univ, Dept Forest Prod, Mississippi State, MS 39762 USA
[6] Univ Extremadura, Dept Quim Inorgan, E-06071 Badajoz, Spain
[7] Penn State Univ, Mat Res Inst, University Pk, PA 16802 USA
[8] Ind Toxicol Res Ctr, Environm Chem Div, Lucknow 226001, Uttar Pradesh, India
基金
美国国家科学基金会;
关键词
bio-oil char; activated carbon; arsenic; cadmium; lead; adsorption; metals removal; bio-oils; bio chars; water treatment;
D O I
10.1016/j.jcis.2007.01.020
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Bio-char by-products from fast wood/bark pyrolyses, were investigated as adsorbents for the removal of the toxic metals (As3+, Cd2+, Pb2+) from water. Oak bark, pine bark, oak wood, and pine wood chars were obtained from fast pyrolysis at 400 and 450 degrees C in an auger-fed reactor and characterized. A commercial activated carbon was also investigated for comparison. Chars were sieved (>600, 600-250, 250-177, 177-149, and < 149 mu m) and the particle size fraction from 600 to 250 mu m was used without further modification for all studies unless otherwise stated. Sorption studies were performed at different temperatures, pHs, and solid to liquid ratios in the batch mode. Maximum adsorption occurred over a pH range 3-4 for arsenic and 4-5 for lead and cadmium. Kinetic studies yielded an optimum equilibrium time of 24 h with an adsorbent dose of 10 g/L and concentration similar to 100 mg/L for lead and cadmium. Sorption isotherms studies were conducted in broad concentration ranges (1-1000 ppb for arsenic, 1 x 10(-5)-5 x 10(-3) M for lead and cadmium). Oak bark out-performed the other chars and nearly mimicked Calgon F-400 adsorption for lead and cadmium. In an aqueous lead solution with initial concentration of 4.8 x 10(-4) M, both oak bark and Calgon F-400 (10 g/L) removed nearly 100% of the heavy metal. Oak bark (10 g/L) also removed about 70% of arsenic and 50% of cadmium from aqueous solutions. Varying temperatures (e.g., 5, 25, and 40 degrees C) were used to determine the effect of temperatures. The equilibrium data were modeled with the help of Langmuir and Freundlich equations. Overall, the data are well fitted with both the models, with a slight advantage for Langmuir model. The oak bark char's ability to remove Pb(II) and Cd(II) is remarkable when considered in terms of the amount of metal adsorbed per unit surface area (0.5 157 mg/m(2) for Pb(II) and 0.213 mg/m(2) for Cd(II) versus that of commercial activated carbon. (c) 2007 Elsevier Inc. All rights reserved.
引用
收藏
页码:57 / 73
页数:17
相关论文
共 50 条
  • [1] Cadmium and lead remediation using magnetic oak wood and oak bark fast pyrolysis bio-chars
    Mohan, Dinesh
    Kumar, Hemant
    Sarswat, Ankur
    Alexandre-Franco, M.
    Pittman, Charles U., Jr.
    CHEMICAL ENGINEERING JOURNAL, 2014, 236 : 513 - 528
  • [2] Valorisation of bio-oil resulting from fast pyrolysis of wood
    Vanderauwera, Paul F. L. P.
    Wambeke, Dorine M. C.
    CHEMICAL PAPERS, 2014, 68 (09): : 1205 - 1212
  • [3] Valorisation of bio-oil resulting from fast pyrolysis of wood
    Paul F. L. P. Vanderauwera
    Dorine M. C. Wambeke
    Chemical Papers, 2014, 68 : 1205 - 1212
  • [4] Optimization of Bark Fast Pyrolysis for the Production of Phenol-Rich Bio-oil
    Ren, Xueyong
    Gou, Jinsheng
    Wang, Wenliang
    Li, Qiang
    Chang, Jianmin
    Li, Ben
    BIORESOURCES, 2013, 8 (04): : 6481 - 6492
  • [5] Fractional condensation of bio-oil vapors produced from birch bark pyrolysis
    Gooty, Aithil Tumbalam
    Li, Dongbing
    Briens, Cedric
    Berruti, Franco
    SEPARATION AND PURIFICATION TECHNOLOGY, 2014, 124 : 81 - 88
  • [6] Estimation of the production cost of fast pyrolysis bio-oil
    Rogers, J. G.
    Brammer, J. G.
    BIOMASS & BIOENERGY, 2012, 36 : 208 - 217
  • [7] Fast pyrolysis corn husk for bio-oil production
    Maulinda, L.
    Husin, H.
    Arahman, N.
    Rosnelly, C. M.
    Andau, E.
    Lestari, W.
    Karo-Karo, J.
    5TH ANNUAL APPLIED SCIENCE AND ENGINEERING CONFERENCE (AASEC 2020), 2021, 1098
  • [8] Bio-oil production from fast pyrolysis of furniture processing residue
    Ly, Hoang Vu
    Tran, Quoc Khanh
    Chun, Byung Hee
    Oh, Changho
    Kim, Jinsoo
    Kim, Seung-Soo
    KOREAN JOURNAL OF CHEMICAL ENGINEERING, 2021, 38 (02) : 306 - 315
  • [9] Effects of temperature on the yields and properties of bio-oil from the fast pyrolysis of mallee bark
    Mourant, Daniel
    Lievens, Caroline
    Gunawan, Richard
    Wang, Yi
    Hu, Xun
    Wu, Liping
    Syed-Hassan, Syed Shatir A.
    Li, Chun-Zhu
    FUEL, 2013, 108 : 400 - 408
  • [10] Thermal Reactivity of Bio-Oil Produced from Catalytic Fast Pyrolysis of Biomass
    Rowland, Steven M.
    Martinez, Rianna
    Wrasman, Cody J.
    Iisa, Kristiina
    Nimlos, Mark R.
    Griffin, Michael B.
    ENERGY & FUELS, 2024, 38 (20) : 19626 - 19638