Mechanical properties and tribological behavior of aluminum matrix composites reinforced with in-situ AlB2 particles

被引：75

作者：

Yuan, Linlin ^{[1
]}

Han, Jingtao ^{[1
]}

Liu, Jing ^{[1
]}

Jiang, Zhengyi ^{[2
]}

机构：

[1] Univ Sci & Technol Beijing, Sch Mat Sci & Engn, Beijing 100083, Peoples R China

[2] Univ Wollongong, Sch Mech Mat & Mechatron Engn, Wollongong, NSW 2500, Australia

来源：

TRIBOLOGY INTERNATIONAL | 2016年 / 98卷

关键词：

Aluminum matrix composites; AlB2; reinforcement; Powder metallurgy; Wear; SLIDING WEAR BEHAVIOR; AL2O3; ALLOY; FABRICATION; EXTRUSION; FRICTION; POWDERS;

D O I：

10.1016/j.triboint.2016.01.046

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Aluminum matrix composites (AMCs) reinforced with in-situ AlB2 particles have been fabricated using a combination of powder metallurgy, hot rolling and solution treatment. The effects of boron content (7 and 12 wt%), hot rolling and heat treatment parameters on the microstructures and mechanical properties of the composites were investigated by means of scanning electron microscopy (SEM), tensile test and micro-hardness measurements. The friction coefficient, wear behavior and scratch morphology of the AMCs and pure aluminum were also studied using scratch tests. The hardness and wear properties are higher in a case of composites when compared to unreinforced matrix material. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：41 / 47

页数：7

共 50 条

[21] Wear Behavior of In-situ TiC Particles Reinforced Aluminum Matrix Composite
隋艳伟
CHEN Xiao
WANG Rui
QI Jiqiu
WEI Fuxiang
HE Yezeng
MENG Qingkun
孙智
JournalofWuhanUniversityofTechnology(MaterialsScience), 2017, 32 (03) : 552 - 556
[22] Wear Behavior of In-situ TiC Particles Reinforced Aluminum Matrix Composite
Sui Yanwei
Chen Xiao
Wang Rui
Qi Jiqiu
Wei Fuxiang
He Yezeng
Meng Qingkun
Sun Zhi
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2017, 32 (03): : 552 - 556
[23] Fabrication and properties of in-situ Al/AlB2 composite reinforced with high aspect ratio borides
Kayikci, Ramazan
Savas, Omer
STEEL AND COMPOSITE STRUCTURES, 2015, 19 (03): : 777 - 787
[24] Fabrication and properties of in-situ Al/AlB2 composite reinforced with high aspect ratio borides
Faculty of Technology, Sakarya University, Sakarya
54187, Turkey
不详
34349, Turkey
Steel Compos. Struct., 3 (777-787):
[25] Enhanced mechanical behavior and fabrication of silicon carbide particles covered by in-situ carbon nanotube reinforced 6061 aluminum matrix composites
Li, Shisheng
Su, Yishi
Zhu, Xinhai
Jin, Huiling
Ouyang, Qiubao
Zhang, Di
MATERIALS & DESIGN, 2016, 107 : 130 - 138
[26] Surface Friction and Wear Behavior of In Situ AlB2 Particle-Reinforced A356 Composites
Jiao, Lei
Li, Fan
Zhao, Yutao
Wang, BaoWang
Huang, XinPeng
Li, Hui
Wu, Tao
Cao, Likun
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (07) : 5812 - 5822
[27] Surface Friction and Wear Behavior of In Situ AlB2 Particle-Reinforced A356 Composites
Lei Jiao
Fan Li
Yutao Zhao
BaoWang Wang
XinPeng Huang
Hui Li
Tao Wu
Likun Cao
Journal of Materials Engineering and Performance, 2022, 31 : 5812 - 5822
[28] Mechanical and tribological properties of TiC nano particles reinforced polymer matrix composites
Jayanthi, A.
Krishna Priya, R.
Surakasi, Raviteja
Prasad Vanam, Jaya
Puthilibai, G.
Santhanakrishnan, M.
Rajkumar, S.
Materials Today: Proceedings, 2022, 59 : 1472 - 1477
[29] Mechanical properties and tribological behavior of aluminum matrix composites reinforced with Fe-based metallic glass particles: Influence of particle size
He, Tianbing
Lu, Tiwen
Ciftci, Nevaf
Tan, Hui
Uhlenwinkel, Volker
Nielsch, Kornelius
Scudino, Sergio
POWDER TECHNOLOGY, 2020, 361 (361) : 512 - 519
[30] Design of Al based composites reinforced with in-situ Al2O3, AlB2 and Al13Fe4 particles
Gao, Tong
Liu, Lingyu
Li, Mengyu
Sun, Yue
Wu, Yuying
Liu, Xiangfa
COMPOSITES COMMUNICATIONS, 2023, 40

← 1 2 3 4 5 →