Performance enhancement in a proton exchange membrane fuel cell with a novel 3D flow field

被引:133
作者
Shen, Jun [1 ,2 ]
Tu, Zhengkai [1 ,2 ]
Chan, Siew Hwa [2 ]
机构
[1] Huazhong Univ Sci & Technol, Sch Energy & Power Engn, Wuhan 430074, Hubei, Peoples R China
[2] Nanyang Technol Univ, Energy Res Inst, 50 Nanyang Ave, Singapore 637553, Singapore
基金
国家重点研发计划;
关键词
PEMFC; 3D flow field; Average synergy angle; Effective mass transfer coefficient; PHYSICAL QUANTITY SYNERGY; CONVECTIVE HEAT-TRANSFER; NUMERICAL-ANALYSIS; PEMFC STACK; DESIGN; CHANNEL; OPTIMIZATION; SIMULATION; MANAGEMENT; HYDROGEN;
D O I
10.1016/j.applthermaleng.2019.114464
中图分类号
O414.1 [热力学];
学科分类号
摘要
Flow field plays a vital role in the design and application of a proton exchange membrane fuel cell (PEMFC). Combined with the enhancement of the abilities of mass transfer and water removal in the flow channel, a new optimized three-dimensional (3D) flow field is proposed to investigate the water transport and cell operating characteristics. The 3D flow field is composed of several straight flow units arranged in a staggered manner with an inclination at the end, and the transition areas and subchannels between the flow units are subjected to hydrophilic treatment. The result indicates that the new type of flow field can effectively separate liquid water from the reactant flow and water can be partially removed through the subchannel. Compared with the conventional flow field, the 3D flow field could enhance the mass transfer ability and improve the PEMFC performance, especially at high current densities. Based on the field synergy principle, we prove that the synergic degree between the velocity vector and concentration gradient agrees with the performance changes under the turbulence of the staggered flow units and the effective mass transfer coefficient (EMTC) in the direction of electrochemical reaction of the 3D flow field is also enhanced.
引用
收藏
页数:9
相关论文
共 36 条
[1]   PEMFC Flow Channel Geometry Optimization: A Review [J].
Aiyejina, Ararimeh ;
Sastry, M. K. S. .
JOURNAL OF FUEL CELL SCIENCE AND TECHNOLOGY, 2012, 9 (01)
[2]  
[Anonymous], 2012, ANSYS FLUENT 14 5 FU
[3]   A numerical study on uniform cooling of large-scale PEMFCs with different coolant flow field designs [J].
Baek, Seung Man ;
Yu, Seung Ho ;
Nam, Jin Hyun ;
Kim, Charn-Jung .
APPLIED THERMAL ENGINEERING, 2011, 31 (8-9) :1427-1434
[4]   Numerical study on a novel 3D cathode flow field and evaluation criteria for the PEM fuel cell design [J].
Cai, Yonghua ;
Fang, Zhou ;
Chen, Ben ;
Yang, Tianqi ;
Tu, Zhengkai .
ENERGY, 2018, 161 :28-37
[5]   Technical performance analysis of a micro-combined cooling, heating and power system based on solar energy and high temperature PEMFC [J].
Chang, Huawei ;
Duan, Chen ;
Xu, Xiangxiang ;
Pei, Houchang ;
Shu, Shuiming ;
Tu, Zhengkai .
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2019, 44 (38) :21080-21089
[6]   Performance degradation and recovery characteristics during gas purging in a proton exchange membrane fuel cell with a dead-ended anode [J].
Chen, Ben ;
Tu, Zhengkai ;
Chan, Siew Hwa .
APPLIED THERMAL ENGINEERING, 2018, 129 :968-978
[7]   Field synergy analysis and optimization of decontamination ventilation designs [J].
Chen, Qun ;
Ren, Jianxun ;
Guo, Zengyuan .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2008, 51 (3-4) :873-881
[8]   Performance of polymer electrolyte membrane fuel cell (PEMFC) stacks Part I. Evaluation and simulation of an air-breathing PEMFC stack [J].
Chu, D ;
Jiang, RZ .
JOURNAL OF POWER SOURCES, 1999, 83 (1-2) :128-133
[9]   Investigation of the performance improvement in decreasing aspect ratio interdigitated flow field PEMFCs [J].
Cooper, Nathanial J. ;
Santamaria, Anthony D. ;
Becton, Maxwell K. ;
Park, Jae Wan .
ENERGY CONVERSION AND MANAGEMENT, 2017, 136 :307-317
[10]   Numerical simulations of two-phase flow in proton exchange membrane fuel cells using the volume of fluid method - A review [J].
Ferreira, Rui B. ;
Falcao, D. S. ;
Oliveira, V. B. ;
Pinto, A. M. F. R. .
JOURNAL OF POWER SOURCES, 2015, 277 :329-342