A highly efficient method with low energy and water consumption in biodegradation of total petroleum hydrocarbons of oily sludge

The hydrocarbons in petroleum sludge are environmental pollutants. It is crucial to eliminate this type of pollution. In this study, a comprehensive and operational study has been conducted on the total petroleum hydrocarbons (TPH) biodegradation in oily sludge. The experiments were performed in a semi-solid phase by two degrader bacterium, Arthrobacter citreus and Rhodococcus jostii, and they were compared with the slurry phase. Solid samples were prepared in three mixing modes of oily sludge with clay. Experiments were conducted by semi-solid bioreactors and other methods on samples contaminated with petroleum hydrocarbons. The performance of the semi-solid bioreactor for the removal of clay-free oily sludge samples showed the best results, in which biodegradation of TPH was 90.33%. GC analyses were conducted on samples before and after biodegradation. It was observed that the contaminants were decomposed uniformly by the microorganisms, except for a combination with a large peak in 12 min. For the best case, the GC-MS test was performed before and after biodegradation. Compounds with a high concentration in the sludge were significantly reduced. Only one heavy aromatic compound was detected in 51.628 min, which decomposed quite slowly and produced a large peak. It was found that 78.2% of the compounds were removed completely.