Enhancing the wear properties of iron based powder metallurgy alloys by boron additions

被引：40

作者：

Guelsoy, H. Oezkan ^{[1
]}

Bilici, M. Kemal ^{[1
]}

Bozkurt, Yahya ^{[1
]}

Salman, Serdar ^{[1
]}

机构：

[1] Marmara Univ, Tech Educ Fac, Dept Mat, TR-34722 Istanbul, Turkey

来源：

MATERIALS & DESIGN | 2007年 / 28卷 / 07期

关键词：

D O I：

10.1016/j.matdes.2006.05.022

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Wear behavior of iron based powder metallurgy (P/M) alloys with boron additions has been studied on a pin-on-disc wear tester using an alloy steel pin and disc of hardness 63 HRC. The P/M alloys in the as sintered as well as different conditions were investigated for their wear behavior. Wear rate was found to initially decrease with increase boron amount. Optical microscopy analysis method was preformed to characterize the basic microstructures for all samples. Scanning electron microscope observations of the worn surface revealed plastics deformations with delamination of surface layers by subsurface cracks as the mechanism in the as sintered conditions. (c) 2006 Elsevier Ltd. All rights reserved.

引用

页码：2255 / 2259

页数：5

共 16 条

[1] Gülsoy HÖ, 2005, SCRIPTA MATER, V52, P187, DOI [10.1016/j.scriptamat.2004.09.032, 10.1016/j.sciptamat.2004.09.032]
[2] Effect of FeB additions on sintering characteristics of injection moulded 17-4PH stainless steel powder
Gülsoy, HÖ
Salman, S
Özbek, S
[J]. JOURNAL OF MATERIALS SCIENCE, 2004, 39 (15) : 4835 - 4840
[3] Densification during the supersolidus liquid-phase sintering of nickel-based prealloyed powder mixtures
Lal, A
Iacocca, RG
German, RM
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1999, 30 (08): : 2201 - 2208
[4] Fretting wear of sintered iron under low normal pressure
Leheup, ER
Zhang, D
Moon, JR
[J]. WEAR, 1998, 221 (02) : 86 - 92
[5] THE UNLUBRICATED WEAR OF SINTERED IRON
LIM, SC
BRUNTON, JH
[J]. WEAR, 1986, 113 (03) : 371 - 382
[6] Liquid phase sintering of iron-carbon alloys with boron additions
Liu, J
Cardamone, A
Potter, T
German, RM
Semel, FJ
[J]. POWDER METALLURGY, 2000, 43 (01) : 57 - 61
[7] Madan D.S., 1989, ADV POWDER METALLURG, V1, P147
[8] WEAR PROCESSES IN HIGH-STRENGTH SINTERED ALLOYS UNDER DRY ROLLING SLIDING
MOLINARI, A
STRAFFELINI, G
[J]. WEAR, 1994, 173 (1-2) : 121 - 128
[9] Influence of microstructure on impact and wear behaviour of sintered Cr and Mo steel
Molinari, A
Straffelini, G
Campestrini, P
[J]. POWDER METALLURGY, 1999, 42 (03) : 235 - 241
[10] Liquid generation during sintering of Fe-3.5%Mo powder compacts with elemental boron additions
Sarasola, M
Gómez-Acebo, T
Castro, F
[J]. ACTA MATERIALIA, 2004, 52 (15) : 4615 - 4622

← 1 2 →