Recovery Characteristics of GdBCO Superconducting Tape With Cooling Fins and Teflon Coating for Resistive Fault Current Limiter

被引：11
|
作者：
Shirai, Yasuyuki [1 ]
Yoneda, Kazuya [1 ]
Higa, Daisuke [1 ]
Shiotsu, Masahiro [1 ]
Honda, Yoshihiro [2 ]
Isojima, Shigeki [2 ]
机构：
[1] Kyoto Univ, Grad Sch Energy Sci, Kyoto 6068501, Japan
[2] Sumitomo Elect Ind, Osaka 5540024, Japan
来源：
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY | 2016年 / 26卷 / 03期
关键词：
Cooling fin; fault current limiter; film boiling; recovery time;
D O I：
10.1109/TASC.2016.2524456
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Recovery time, which is defined as the time during which the superconducting component recovers to its initial condition after the current-limiting operation, is very important to design an SFCL. In this paper, the cooling properties of GdBCO superconducting tape with various types of fins or PTFE (poly-tetrafluoroethylene: Teflon) coating were investigated. Superconducting tape was heated by current, which was larger than its critical current, in liquid nitrogen. The cooling down speed after the current shut down from film boiling to nonboiling and to the superconducting state was investigated. To clarify the effect of surface condition on the heat transfer characteristics, the superconducting test tapes with various shaped fins or PTFE coating were compared with that without fins/coating. According to the experimental results, it was confirmed that superconducting tape with fins or PTFE coating recovered to the superconducting state faster than that without fins/coating and is hopeful for the cooling design of SFCL.
引用
收藏
页数：4
相关论文
共 45 条
  • [41] A proposal of fast self-acting and recovering magnetic shield type superconducting fault current limiter and the analyses of their characteristics
    Onishi, T
    Sasaki, K
    Akimoto, R
    CRYOGENICS, 2001, 41 (04) : 239 - 243
  • [42] Development of the design factor for the 1phase module of 6.6kV/200A class resistive superconducting fault current limiter
    Kang, JS
    Lee, BW
    Park, KB
    Oh, IS
    2004 IEEE PES POWER SYSTEMS CONFERENCE & EXPOSITION, VOLS 1 - 3, 2004, : 7 - 11
  • [43] Analysis of recovery characteristic in commutation-type superconducting fault current limiter considering time-current characteristic of protective relay and system impedance
    Mimura, K
    Shimizu, H
    Yokomizu, Y
    Matsumura, T
    ELECTRICAL ENGINEERING IN JAPAN, 2001, 136 (04) : 26 - 33
  • [44] Step-by-step design of a single phase 3.3 kV/200 a resistive type superconducting fault current limiter (R-SFCL) and cryostat
    Kar, Soumen
    Rao, V. V.
    PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2018, 550 : 107 - 116
  • [45] Environment-resistive coating for the thin-film-based superconducting fault-current limiter Ag/Au-Ag/YBa2Cu3O7/CeO2/Al2O3
    Matsui, H.
    Kondo, W.
    Tsukada, K.
    Sohma, M.
    Yamaguchi, I.
    Kumagai, T.
    Manabe, T.
    Arai, K.
    Yamasaki, H.
    PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2010, 470 (03): : 221 - 224
12345