Recovery Characteristics of GdBCO Superconducting Tape With Cooling Fins and Teflon Coating for Resistive Fault Current Limiter

被引:11
|
作者
Shirai, Yasuyuki [1 ]
Yoneda, Kazuya [1 ]
Higa, Daisuke [1 ]
Shiotsu, Masahiro [1 ]
Honda, Yoshihiro [2 ]
Isojima, Shigeki [2 ]
机构
[1] Kyoto Univ, Grad Sch Energy Sci, Kyoto 6068501, Japan
[2] Sumitomo Elect Ind, Osaka 5540024, Japan
关键词
Cooling fin; fault current limiter; film boiling; recovery time;
D O I
10.1109/TASC.2016.2524456
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Recovery time, which is defined as the time during which the superconducting component recovers to its initial condition after the current-limiting operation, is very important to design an SFCL. In this paper, the cooling properties of GdBCO superconducting tape with various types of fins or PTFE (poly-tetrafluoroethylene: Teflon) coating were investigated. Superconducting tape was heated by current, which was larger than its critical current, in liquid nitrogen. The cooling down speed after the current shut down from film boiling to nonboiling and to the superconducting state was investigated. To clarify the effect of surface condition on the heat transfer characteristics, the superconducting test tapes with various shaped fins or PTFE coating were compared with that without fins/coating. According to the experimental results, it was confirmed that superconducting tape with fins or PTFE coating recovered to the superconducting state faster than that without fins/coating and is hopeful for the cooling design of SFCL.
引用
收藏
页数:4
相关论文
共 45 条
  • [31] Impact of Current Transfer to Porous Stabilizer on Recovery Performance of Resistive-Type Superconducting Fault Current Limiters Using REBCO Tapes
    Yuki, Kohei
    Ito, Satoshi
    Hashizume, Hidetoshi
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2022, 32 (04)
  • [32] Conceptual design of a 110 kV resistive superconducting fault current limiter using MCP-BSCCO 2212 bulk material
    Noe, Mathias
    Kudymow, Andrej
    Fink, Stefan
    Elschner, Steffen
    Breuer, Frank
    Bock, Joachim
    Walter, Heribert
    Kleimaier, Martin
    Weck, Karl-Heinz
    Neumann, Claus
    Merschel, Frank
    Heyder, Bernd
    Schwing, Ulrich
    Frohne, Christian
    Schippl, Klaus
    Stemmle, Mark
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2007, 17 (02) : 1784 - 1787
  • [33] Development of 440-V 800-A Resistive-Type Modular Superconducting Fault Current Limiter With YBCO Tapes
    Dixit, Manglesh
    Kedia, Sunil
    Kulkarni, Sandeep
    Patil, Shubhangi
    Andrews, Lalichan
    Gupta, Alok
    Balasubramanyam, P. V.
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2012, 22 (05)
  • [34] Design and Experimental Results of Three-Phase Superconducting Fault Current Limiter Using Highly-Resistive YBCO Tapes
    Yazawa, Takashi
    Koyanagi, Kei
    Takahashi, Masahiko
    Ono, Michitaka
    Sakai, Masahiro
    Toba, Koji
    Takigami, Hiroyuki
    Urata, Masami
    Iijima, Yasuhiro
    Saitoh, Takashi
    Amemiya, Naoyuki
    Shiohara, Yuh
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2009, 19 (03) : 1956 - 1959
  • [35] Study of recovery characteristics of 2nd generation HTS tapes with different stabilizers for resistive type superconducting fault current limiters
    Sheng, Jie
    Zeng, Weina
    Ma, Jun
    Yao, Zhihao
    Li, Zhuyong
    Jin, Zhijian
    Hong, Zhiyong
    PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2016, 521 : 33 - 37
  • [36] Simulation of a Superconducting Fault Current Limiter: A Case Study in the Brazilian Power System With Possible Recovery Under Load
    Batista de Sousa, Wescley Tiago
    Lessa Assis, Tatiana Mariano
    Polasek, Alexander
    Monteiro, Andreia Maia
    de Andrade, Rubens, Jr.
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2016, 26 (02)
  • [37] System technology and test of CURL 10, a 10 kV, 10 MVA resistive high-Tc superconducting fault current limiter
    Kreutz, R
    Bock, J
    Breuer, F
    Juengst, KP
    Kleimaier, M
    Klein, HU
    Krischel, D
    Noe, M
    Steingass, R
    Weck, KH
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2005, 15 (02) : 1961 - 1964
  • [38] A Quenching Recovery Time Test Method for Resistive Type Superconducting Fault Current Limiters Used in DC Circuit
    Ge, Hanming
    Yang, Kun
    Junaid, Muhammad
    Tan, Yaxiong
    Liu, Zhiyuan
    Geng, Yingsan
    Wang, Jianhua
    2017 4TH INTERNATIONAL CONFERENCE ON ELECTRIC POWER EQUIPMENT-SWITCHING TECHNOLOGY (ICEPE-ST), 2017, : 393 - 396
  • [39] Current Limiting and Recovery Characteristics of 2 MVA Class Superconducting Fault Current Limiting Transformer (SFCLT)
    Kojima, Hiroki
    Kotari, Masashi
    Kito, Toyoaki
    Hayakawa, Naoki
    Hanai, Masahiro
    Okubo, Hitoshi
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2011, 21 (03) : 1401 - 1404
  • [40] A study on the short-circuit test by fault angle control and the recovery characteristics of the fault current limiter using coated conductor
    Park, D. K.
    Kim, Y. J.
    Ahn, M. C.
    Yang, S. E.
    Seok, B.-Y.
    Ko, T. K.
    PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, 2007, 463 (SUPPL.): : 1188 - 1192