Experimental investigation of cutting tool performance in high speed cutting of hardened X210 Cr12 cold-work tool steel (62 HRC)

被引：59

作者：

Aslan, E ^{[1
]}

机构：

[1] Kirrikale Univ, Dept Mech Engn, TR-7140 Kirikkale, Turkey

来源：

MATERIALS & DESIGN | 2005年 / 26卷 / 01期

关键词：

tool performance; tool wear; hardened tool steel;

D O I：

10.1016/j.matdes.2004.04.004

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study explored the performance and wear behaviour of different cutting tools in end milling of X210 Cr12 cold-work tool steel hardened to 62 HRC. The purpose of the experiments reported in this paper is to investigate the wear of TiCN coated tungsten carbide, TiCN + TiAlN coated tungsten carbide, TiAlN coated cermet, mixed ceramic with Al2O3 + TiCN and cubic boron nitride (CBN) tools. Tool performance evaluation was based on the surface finish and tool flank wear. Tool flank wear was studied carefully through JSM 5600 (30 kW) scanning electron microscope. Surface roughness values were measured by Mitutoyo Metusurf 310 equipment. CBN tool exhibited the best cutting performance in terms of both flank wear and surface finish. The highest volume of metal removal was obtained with CBN tool. (C) 2004 Elsevier Ltd. All rights reserved.

引用

页码：21 / 27

页数：7

共 33 条

[11] TI(C,N) COATINGS USING THE ARC PROCESS [J].

ERTURK, E ;

KNOTEK, O ;

BURGMER, W ;

PRENGEL, HG ;

HEUVEL, HJ ;

DEDERICHS, HG ;

STOSSEL, C .

SURFACE & COATINGS TECHNOLOGY, 1991, 46 (01) :39-46

[12] An overview of the machinability of aeroengine alloys [J].

Ezugwu, EO ;

Bonney, J ;

Yamane, Y .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 134 (02) :233-253

[13] High-speed machining of cast iron and alloy steels for die and mold manufacturing [J].

Fallböhmer, P ;

Rodríguez, CA ;

Özel, T ;

Altan, T .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 98 (01) :104-115

[14] MORPHOLOGY AND STRUCTURE OF ION-PLATED TIN, TIC AND TI(C,N) COATINGS [J].

GABRIEL, HM ;

KLOOS, KH .

THIN SOLID FILMS, 1984, 118 (03) :243-254

[15] Advanced coated ceramic tools for machining superalloys [J].

Gatto, A ;

Iuliano, L .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1997, 37 (05) :591-605

[16] Study of tool life, surface roughness and vibration in machining nodular cast iron with ceramic tool [J].

Ghani, AK ;

Choudhury, IA ;

Husni .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 127 (01) :17-22

[17]

GOUGH J, 1990, PRECISION TOOLMAKER, V8, P154

[18] MICROSTRUCTURE AND HARDNESS OF TI(C,N) COATINGS ON STEEL PREPARED BY THE ACTIVATED REACTIVE EVAPORATION TECHNIQUE [J].

JACOBSON, BE ;

DESHPANDEY, CV ;

DOERR, HJ ;

KARIM, AA ;

BUNSHAH, RF .

THIN SOLID FILMS, 1984, 118 (03) :285-292

[19]

KING RI, 1985, HDB HIGH SPEED MACHI

[20]

KONIG W, 1990, IND DIAMOND REV, V3, P139

← 1 2 3 4 →