Pollen wall ultrastructure and ontogeny in Heliotropium europaeum L. (Boraginaceae)

The pollen grains of Heliotropium europaeum are heterocolpate, with alternation of 3 colpori and 3 pseudocolpi. The exine is characterized by a scabrate and thick tectum, massive columellae with a granular appearance and a thick nexine. The thickening of the intine at the apertural level makes the interpretation of this zone difficult. The ontogenetic 4 study helped to understand the ultrastructure of the exine and the apertures. The different steps are as follows. The primexine matrix is formed during the beginning of the tetrad stage; it consists of an outer thick and electron dense zone and an inner one, less dense to electrons. The rectum and the infratectum begin to form in the outer zone of the manix. towards the middle of the tetrad stage. The infratectum consists of a network of columellae variable in thickness and oriented in different directions. The foot layer is lacking. The endexine is formed on a lamella system during the callose loss and microspore separation. The endexine becomes compact very early on its inner pan. The apertures are initiated during the tetrad stage; a granulo-fibrillar oncus develops. At the free microspore stage. the oncus gets fibrillar and is bordered by endexine lamellae on its outer side and by endexine granulations on its inner one and laterally. The intine is set at the end of this stage. At the vacuolated microspore stage, the intine shows three layers: two thin. clear and homogeneous, layers. one outside and the other inside, and a thick middle layer that forms the zwischenkorper, crossed by trabecula, in the apertural areas. (C) 2004 Elsevier B.V. All rights reserved.