On anisotropy of ferritic ODS alloys

被引：31
作者：
Serrano, M. [1 ]
Garcia-Junceda, A. [1 ]
Hernandez, R. [1 ]
Mayoral, M. H. [1 ]
机构：
[1] CIEMAT, Struct Mat Div, E-28040 Madrid, Spain
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 2014年 / 30卷 / 13B期
关键词：
ODS; Delamination; Fracture anisotropy; MECHANICAL-PROPERTIES; STEELS; BEHAVIOR; DEFORMATION; TENSILE;
D O I：
10.1179/1743284714Y.0000000552
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ferritic oxide dispersion strengthened (ODS) alloys are candidate materials to be used as cladding for long term fast reactors, due to their high strength at high temperature and good swelling and irradiation resistances. The fabrication of cladding tubes is usually made by a succession of cold deformation steps where a deformation induced anisotropic microstructure could take place, which would affect the mechanical behaviour of the tube. The characterisation of this microstructural anisotropy is one of the key issues in the development of cladding ODS tubes. In this paper, the microstructural anisotropy of a Fe-14Cr-ODS extruded bar and a Fe-12Cr-ODS plate is characterised and its effect on the mechanical properties is analysed by tensile, impact and small punch testing. In both materials, a reduction of the ductility is observed in the transverse specimens. In addition, the fracture behaviour seems to be strongly dependent on the location of the crack plane regarding the elongated grained microstructure.
引用
收藏
页码：1664 / 1668
页数：5
相关论文
共 23 条
[1]   Assessment of ODS-14%Cr ferritic alloy for high temperature applications [J].
Alamo, A ;
Lambard, V ;
Averty, X ;
Mathon, MH .
JOURNAL OF NUCLEAR MATERIALS, 2004, 329 :333-337
[2]  
[Anonymous], 2012, E3999 ASTM INT
[3]   Notch Impact Behavior of Oxide-Dispersion-Strengthened (ODS) Fe20Cr5Al Alloy [J].
Chao, J. ;
Capdevila, C. ;
Serrano, M. ;
Garcia-Junceda, A. ;
Jimenez, J. A. ;
Pimentel, G. ;
Urones-Garrote, E. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (10) :4581-4594
[4]  
de Carlan Y., 2013, P 8 EUR C EUR RES TR
[5]   ODS Ferritic/martensitic alloys for Sodium Fast Reactor fuel pin cladding [J].
Dubuisson, Philippe ;
de Carlan, Yann ;
Garat, Veronique ;
Blat, Martine .
JOURNAL OF NUCLEAR MATERIALS, 2012, 428 (1-3) :6-12
[6]   Mechanical behaviour of ferritic ODS steels - Temperature dependancy and anisotropy [J].
Fournier, B. ;
Steckmeyer, A. ;
Rouffie, A. -L. ;
Malaplate, J. ;
Garnier, J. ;
Ratti, M. ;
Wident, P. ;
Ziolek, L. ;
Tournie, I. ;
Rabeau, V. ;
Gentzbittel, J. M. ;
Kruml, T. ;
Kubena, I. .
JOURNAL OF NUCLEAR MATERIALS, 2012, 430 (1-3) :142-149
[7]   Influence of the microstructure on the tensile and impact properties of a 14Cr ODS steel bar [J].
Garcia-Junceda, A. ;
Hernandez-Mayoral, M. ;
Serrano, M. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 556 :696-703
[8]  
Joo M. S., 2012, Ph. D. Thesis
[9]   Delamination cracking in advanced aluminum-lithium alloys - Experimental and computational studies [J].
Kalyanam, S. ;
Beaudoin, A. J. ;
Dodds, R. H., Jr. ;
Barlat, F. .
ENGINEERING FRACTURE MECHANICS, 2009, 76 (14) :2174-2191
[10]   Anisotropy in tensile and ductile-brittle transition behavior of ODS ferritic steels [J].
Kasada, R. ;
Lee, S. G. ;
Isselin, J. ;
Lee, J. H. ;
Omura, T. ;
Kimura, A. ;
Okuda, T. ;
Inoue, M. ;
Ukai, S. ;
Ohnuki, S. ;
Fujisawa, T. ;
Abe, F. .
JOURNAL OF NUCLEAR MATERIALS, 2011, 417 (1-3) :180-184
123