5-Sulfoisophthalic acid monolithium salt doped polypyrrole/multiwalled carbon nanotubes composites for EMI shielding application in X-band (8.2-12.4 GHz)

被引:20
作者
Gahlout, Pragati [1 ]
Choudhary, Veena [1 ]
机构
[1] Indian Inst Technol, Ctr Polymer Sci & Engn, New Delhi 110016, India
关键词
applications; conducting polymers; graphene and fullerenes; nanotubes; surfactants; thermogravimetric analysis (TGA); ELECTROMAGNETIC-INTERFERENCE; MICROWAVE-ABSORPTION; CONDUCTING POLYMER; POLYPYRROLE; PYRROLE;
D O I
10.1002/app.45370
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
This article describes the synthesis and characterization of highly conductive polypyrrole (PPy)/multiwalled carbon nanotube (MWCNT) composites prepared by in situ polymerization of pyrrole using 5-sulfoisophthalic acid monolithium salt [lithio sulfoisophthalic acid (LiSiPA)] as dopant and ferric chloride as oxidant. Several samples were prepared by varying the amounts of MWCNTs ranging from 1 to 5 wt %. Scanning electron microscope and transmission electron microscope images clearly show a thick coating of PPy on surface of MWCNTs. The electrical conductivity of PPy increased with increasing amount of MWCNTs and maximum conductivity observed was 52 S/cm at a loading of 5 wt % of MWCNTs. Pure PPy prepared under similar conditions had a conductivity of 25 S/cm. Electromagnetic interference (EMI) shielding effectiveness (SE) also showed a similar trend and average EMI shielding of -108 dB (3 mm) was observed for sample having 5 wt % MWCNT in the frequency range of 8.2-12.4 GHz (X-band). The light weight and absorption dominated total SE of -93 to -108 dB of these composites indicate the usefulness of these materials for microwave shielding. (c) 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45370.
引用
收藏
页数:10
相关论文
共 42 条
  • [1] Annadurai P, 2002, J APPL POLYM SCI, V83, P145, DOI 10.1002/app.2237
  • [2] Charge transport and magnetic properties of coaxial composite fibrils of polypyrrole/multiwall carbon nanotubes at low temperature
    Bhatia, Ravi
    Sameera, I.
    Prasad, V.
    Menon, Reghu
    [J]. SOLID STATE COMMUNICATIONS, 2013, 159 : 93 - 97
  • [3] In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites
    Bose, Saswata
    Kuila, Tapas
    Uddin, Md Elias
    Kim, Nam Hoon
    Lau, Alan K. T.
    Lee, Joong Hee
    [J]. POLYMER, 2010, 51 (25) : 5921 - 5928
  • [4] Chitte H K., 2011, Journal of Sensor Technology, V2, P47
  • [5] Dopant effect and characterization of polypyrrole-cellulose composites prepared by in situ polymerization process
    Ding, Chunyue
    Qian, Xueren
    Yu, Gang
    An, Xianhui
    [J]. CELLULOSE, 2010, 17 (06) : 1067 - 1077
  • [6] SIMPLE METHOD FOR MASS PRODUCTION OF POLYPYRROLE/CARBON NANOTUBES HYBRID ARTIFICIAL MUSCLE
    dos Santos, Marcelo R.
    de Oliveira, Helinando P.
    [J]. QUIMICA NOVA, 2014, 37 (06): : 1000 - 1003
  • [7] Fan JH, 1999, J APPL POLYM SCI, V74, P2605, DOI 10.1002/(SICI)1097-4628(19991209)74:11<2605::AID-APP6>3.0.CO
  • [8] 2-R
  • [9] Gahlout P., 2016, SYNTH MET, V222, P170
  • [10] EMI Shielding: Methods and Materials-A Review
    Geetha, S.
    Kumar, K. K. Satheesh
    Rao, Chepuri R. K.
    Vijayan, M.
    Trivedi, D. C.
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2009, 112 (04) : 2073 - 2086