Towards the dependence of radiation damage on the grain boundary character and grain size in tungsten: A combined study of molecular statics and rate theory

Grain boundary (GB) character and radiation conditions restrict the in-depth understanding of the effectiveness of tailoring grain size in controlling the radiation damage and promoting the radiation resistance of materials. Here, we constructed 46 [0 0 1] W symmetric tilt GBs with tilt angle varying from 6.73 degrees to 82.37 degrees Then, molecular statics (MS) was used to investigate the impact of GB character (tilt angle, GB energy, E) on the defect energetics. The present results suggested that it is energetically favorable for Vs/SIAs to segregate into the GB and GBs have the biased absorption of SIAs over Vs. Some high-angle and high-energy GBs could provide larger energetic driving force for the V/SIA to segregate. Multiple Vs/SIAs tended to be bound together inside the GB, with a varying binding strength. Using steady-state rate theory (RT) calculations, we explored the Vs accumulation in the W systems with different grain sizes (50-1000 nm) under the typical radiation conditions of temperature (300-1800 K) and dose rate (10(-8)-10(2) dpa/s). In particular, based on the results of MS calculations, the effect of GB character on the Vs accumulation was examined by varying V segregation energies (0.99-2.04 eV). In the process, two extreme values (2.04 and 0.99 eV) of V segregation energy were extracted to investigate its impact, with other values being in this range. The results suggested that nanocrystalline (NC) W would exhibit better radiation tolerance than coarse-grained (CG) W under the conditions of a relatively high temperature and low dose rate. A high V segregation energy led to a low damage accumulation in the grain interior. Some high-angle and high-energy GBs with a large V segregation energy and a small V-V binding energy were expected to improve the radiation resistance of NC. (c) 2022 Elsevier B.V. All rights reserved.