Facile one-step extraction and oxidative carboxylation of cellulose nanocrystals through hydrothermal reaction by using mixed inorganic acids

A facile and efficient approach to prepare carboxylated cellulose nanocrystals (CCNCs) is presented through a novel one-step hydrothermal procedure by using a mixed acid system of hydrochloric acid and nitric acid (HCl/HNO3). The as-prepared cellulose nanoparticles were characterized by scanning electron microscopy, wide angle X-ray diffraction, conductometric titrations, Fourier transform infrared spectrometry and thermal gravimetric analysis. The results showed that the combination of the mixed acid and hydrothermal reaction can speed up the process of CCNC preparation, and then high quality of the product could be obtained at relatively low acid concentration. It is found that the addition of nitric acid could not only promote the conversion of surface groups on the cellulose nanocrystals (CNCs), but also have significant influences on the yield, particle size and microstructure of CNCs. For the volume ratio of HCl/HNO3 of 7:3, the as-prepared CCNCs exhibited the largest length to diameter ratio and narrowest dimension distributions as well as maximum degree of oxidation of 0.12. In addition, high dispersion stability for the CCNCs could be observed due to the existence of negative carboxyl groups. This approach based on one-step oxidative carboxylation greatly simplified the preparation of CCNCs with high yield and high crystallinity under mild hydrothermal condition.