Influence of tool pin profile on the metallurgical and mechanical properties of friction stir welded Al-10 wt.% TiB2 metal matrix composite

被引：149
作者：
Vijay, S. J. [1 ]
Murugan, N. [2 ]
机构：
[1] Karunya Univ, Sch Mech Sci, Coimbatore 641114, Tamil Nadu, India
[2] CIT, Dept Mech Engn, Coimbatore 641014, Tamil Nadu, India
来源：
MATERIALS & DESIGN | 2010年 / 31卷 / 07期
关键词：
ALUMINUM-ALLOY; PROCESSING ZONE; MICROSTRUCTURE;
D O I：
10.1016/j.matdes.2010.01.018
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present work, Al-10 wt.% TiB2 metal matrix composites (MMCs) are joined using friction stir welding (FSW) process. Different tool pin profiles are developed to weld the MMCs and the effect of tool pin profile on metallurgical and mechanical properties of the weldments are studied. The stirred zones of MMCs joined with taper pin profiles are narrower than that are joined with straight pin profiles. Weld nugget has finer grains compared to other weld zones and TiB2 particulates are homogeneously present in Al matrix both in weld and parent metal. The effect of pin profiles on mechanical properties are analyzed and it is found that joints welded with straight square pin profile have better mechanical properties compared to the other pin profiles. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码：3585 / 3589
页数：5
相关论文
共 17 条
[1]  
BERAHA E, 1977, AM SOC METALS, V30, P88
[2]   Effect of friction stir welding on microstructure, tensile and fatigue properties of the AA7005/10 vol.%Al2O3p composite [J].
Ceschini, L. ;
Boromei, I. ;
Minak, G. ;
Morrri, A. ;
Tarterini, F. .
COMPOSITES SCIENCE AND TECHNOLOGY, 2007, 67 (3-4) :605-615
[3]   Microstructure and mechanical properties of friction stir welded AA6063-B4C metal matrix composites [J].
Chen, X-G. ;
da Silva, M. ;
Gougeon, P. ;
St-Georges, L. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 518 (1-2) :174-184
[4]   Friction stir welding characteristics of different heat-treated-state 2219 aluminum alloy plates [J].
Chen, YC ;
Liu, HJ ;
Feng, JC .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 420 (1-2) :21-25
[5]  
Chionopoulos S. K., 2008, P 3 INT C MAN ENG IC, P307
[6]   Modeling strain hardening and texture evolution in friction stir welding of stainless steel [J].
Cho, JH ;
Boyce, DE ;
Dawson, PR .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 398 (1-2) :146-163
[7]  
Christy TV, 2010, INT J EMERG TECHNOL, V3, P566
[8]  
Dawes CJ, 1996, WELD J, V75, P41
[9]   Influences of tool pin profile and tool shoulder diameter on the formation of friction stir processing zone in AA6061 aluminium alloy [J].
Elangovan, K. ;
Balasubramanian, V. .
MATERIALS & DESIGN, 2008, 29 (02) :362-373
[10]   Influences of pin profile and rotational speed of the tool on the formation of friction stir processing zone in AA2219 aluminium alloy [J].
Elangovan, K. ;
Balasubramanian, V. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 459 (1-2) :7-18
12